SKU: 910053
Yale Y3 Nightlatch - 60mm Backset - Polished Chrome Case/Cylinder
5.0
(2)
40 in stock
A modern designed nightlatch to replace the traditional P77 nightlatch with no additional chiselling
About this product
- A modern designed nightlatch to replace the traditional P77 nightlatch with no additional chiselling
- Suitable for left and right handed inward opening doors
- Snib function to allow latch to be held or deadlocked internally
Specification & Documentation
Backset (mm)
60
Case Finish
Polished Chrome
Cylinder Finish
Polished Chrome
Option
Keyed to Differ
Suit Door (mm)
35-57
Type
Nightlatch
Inward/Outward Opening
Inward Opening Only
British Standard
No
CE Rated
No
Secured by Design
No
UKCA Approved
No
Fire Rating
No
Pack Quantity
1
Documents
About this product
- A modern designed nightlatch to replace the traditional P77 nightlatch with no additional chiselling
- Suitable for left and right handed inward opening doors
- Snib function to allow latch to be held or deadlocked internally
Specification & Documentation
Backset (mm)
60
Case Finish
Polished Chrome
Cylinder Finish
Polished Chrome
Option
Keyed to Differ
Suit Door (mm)
35-57
Type
Nightlatch
Inward/Outward Opening
Inward Opening Only
British Standard
No
CE Rated
No
Secured by Design
No
UKCA Approved
No
Fire Rating
No
Pack Quantity
1
Documents
About this product
- Yale Part Code: YD-01-CON-NOMOD-CH
- Replaces the nightlatches existing rim cylinder allowing the door to be opened with either the keypad, a tag or a card so no need for keys
- Only suitable for nightlatches with a 60mm backset on timber and composite doors
- Lock operated by either Key Pad, Key Tag or Key Card
- Tamper alarm if code incorrectly entered 3 times
- Advanced touchscreen for ease of programming
- Operated with 4 x AA batteries for 10,000 operations with low battery warning
- 9v battery override in the event of battery failure
- Supplied with 1 x Key Tag and 1 x Key Card
- Lock can be upgraded at a later date by ordering the desired module (excludes existing Keyless locks)
- For doors between 30-57mm thick
Specification & Documentation
Backset (mm)
60
Door Thickness (mm)
30-57
Finish
Polished Chrome
Option
No Module
Type
Electronic
Use
Interior & Exterior
Hand
Reversible
Model
YD-01-CON-NOMOD-CH
Key Override
Yes
British Standard
No
CE Rated
Yes
Secured by Design
Yes
UKCA Approved
Yes
Fire Rating
No
Pack Quantity
1
Documents
About this product
- Yale Part Code: YD-01-CON-NOMOD-CH
- Replaces the nightlatches existing rim cylinder allowing the door to be opened with either the keypad, a tag or a card so no need for keys
- Only suitable for nightlatches with a 60mm backset on timber and composite doors
- Lock operated by either Key Pad, Key Tag or Key Card
- Tamper alarm if code incorrectly entered 3 times
- Advanced touchscreen for ease of programming
- Operated with 4 x AA batteries for 10,000 operations with low battery warning
- 9v battery override in the event of battery failure
- Supplied with 1 x Key Tag and 1 x Key Card
- Lock can be upgraded at a later date by ordering the desired module (excludes existing Keyless locks)
- For doors between 30-57mm thick
Specification & Documentation
Backset (mm)
60
Door Thickness (mm)
30-57
Finish
Polished Chrome
Option
No Module
Type
Electronic
Use
Interior & Exterior
Hand
Reversible
Model
YD-01-CON-NOMOD-CH
Key Override
Yes
British Standard
No
CE Rated
Yes
Secured by Design
Yes
UKCA Approved
Yes
Fire Rating
No
Pack Quantity
1
Documents
About this product
- Yale Part Code: YD-01-CON-NOMOD-SN
- Replaces the nightlatches existing rim cylinder allowing the door to be opened with either the keypad, a tag or a card so no need for keys
- Only suitable for nightlatches with a 60mm backset on timber and composite doors
- Lock operated by either Key Pad, Key Tag or Key Card
- Tamper alarm if code incorrectly entered 3 times
- Advanced touchscreen for ease of programming
- Operated with 4 x AA batteries for 10,000 operations with low battery warning
- 9v battery override in the event of battery failure - Code input still required
- Supplied with 1 x Key Tag and 1 x Key Card
- Lock can be upgraded at a later date by ordering the desired module (excludes existing Keyless locks)
Specification & Documentation
Backset (mm)
60
Door Thickness (mm)
35 - 57
Finish
Satin Nickel
Type
Electronic
Use
Interior & Exterior
British Standard
No
CE Rated
Yes
Secured by Design
Yes
UKCA Approved
Yes
Fire Rating
No
Pack Quantity
1
Documents
About this product
- Yale Part Code: YD-01-CON-NOMOD-SN
- Replaces the nightlatches existing rim cylinder allowing the door to be opened with either the keypad, a tag or a card so no need for keys
- Only suitable for nightlatches with a 60mm backset on timber and composite doors
- Lock operated by either Key Pad, Key Tag or Key Card
- Tamper alarm if code incorrectly entered 3 times
- Advanced touchscreen for ease of programming
- Operated with 4 x AA batteries for 10,000 operations with low battery warning
- 9v battery override in the event of battery failure - Code input still required
- Supplied with 1 x Key Tag and 1 x Key Card
- Lock can be upgraded at a later date by ordering the desired module (excludes existing Keyless locks)
Specification & Documentation
Backset (mm)
60
Door Thickness (mm)
35 - 57
Finish
Satin Nickel
Type
Electronic
Use
Interior & Exterior
British Standard
No
CE Rated
Yes
Secured by Design
Yes
UKCA Approved
Yes
Fire Rating
No
Pack Quantity
1
Documents
About this product
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Butt Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
Option
Ball Bearing
Length (mm)
100
About this product
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Butt Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
Option
Ball Bearing
Length (mm)
100
About this product
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Intumescent Hinge Pads
Material
Graphite
About this product
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Intumescent Hinge Pads
Material
Graphite
About this product
- For use on interior doors - offices, store rooms
- Light duty
- Off door code change
- Supplied with a 60mm backset latchbolt
- Testing: BS EN 1634-1. For use on 30 minute timber fire doors (Only if installed with intumescent pack. Sold separately)
- Suits 33-55mm thick doors
- 8000 individual codes
- Code length: 4
- Reversible handing
- Holdback function
- No code free function or key override
- All mechanical code locks use non-sequential codes, which means the 4-digit code can be entered in any order - e.g. 1234 can be 4321 or 1342. This is a lower security option than electronic locks but makes them ideal for smaller businesses or premises looking for the convenience and security of access control on a smaller budget
- For Intumescent to suit, search AR195 Intumescent
Specification & Documentation
Backset (mm)
60
Code Change
Off Door
Code Free Function
No
Code Length
4
Door Thickness (mm)
33-55
Finish
Satin Chrome
Hand
Reversible
Hold Back Function
Yes
Individual Codes
8000
Option
Knob
Type
Mechanical Code Lock
Use
Interior
Key Override
No
Material
Solid Brass
Model
AR195
Fire Rating
No
Pack Quantity
1
Documents
About this product
- For use on interior doors - offices, store rooms
- Light duty
- Off door code change
- Supplied with a 60mm backset latchbolt
- Testing: BS EN 1634-1. For use on 30 minute timber fire doors (Only if installed with intumescent pack. Sold separately)
- Suits 33-55mm thick doors
- 8000 individual codes
- Code length: 4
- Reversible handing
- Holdback function
- No code free function or key override
- All mechanical code locks use non-sequential codes, which means the 4-digit code can be entered in any order - e.g. 1234 can be 4321 or 1342. This is a lower security option than electronic locks but makes them ideal for smaller businesses or premises looking for the convenience and security of access control on a smaller budget
- For Intumescent to suit, search AR195 Intumescent
Specification & Documentation
Backset (mm)
60
Code Change
Off Door
Code Free Function
No
Code Length
4
Door Thickness (mm)
33-55
Finish
Satin Chrome
Hand
Reversible
Hold Back Function
Yes
Individual Codes
8000
Option
Knob
Type
Mechanical Code Lock
Use
Interior
Key Override
No
Material
Solid Brass
Model
AR195
Fire Rating
No
Pack Quantity
1
Documents
This product is rated 5.0 out of 5 by other customers
Yale latch
Fantastic item, strong and durable, would recommend to anyone..
Yale Lock
This is a very robust product and have used this in several properties with any worries.
About this product
- A modern designed nightlatch to replace the traditional P77 nightlatch with no additional chiselling
- Suitable for left and right handed inward opening doors
- Snib function to allow latch to be held or deadlocked internally
About this product
- A modern designed nightlatch to replace the traditional P77 nightlatch with no additional chiselling
- Suitable for left and right handed inward opening doors
- Snib function to allow latch to be held or deadlocked internally
Specification & Documentation
Backset (mm)
60
Case Finish
Polished Chrome
Cylinder Finish
Polished Chrome
Option
Keyed to Differ
Suit Door (mm)
35-57
Type
Nightlatch
Inward/Outward Opening
Inward Opening Only
British Standard
No
CE Rated
No
Secured by Design
No
UKCA Approved
No
Fire Rating
No
Pack Quantity
1
Documents
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Anonymous - 6 years ago
Yale latch
Fantastic item, strong and durable, would recommend to anyone..
Was this review helpful?
Verified customer
Anish Shah - 7 years ago
Yale Lock
This is a very robust product and have used this in several properties with any worries.
Was this review helpful?
Verified customer
Page 1 of 1
Questions
