SKU: 464060
Trend Router Cutter to Suit 10mm Intumescent Strip
4.7
(13)
33 in stock
Save time when fitting intumescent strips by using the router cutter
£29.45
Buy in bulk & save up to 5%
- 30 minute fire rated intumescent strip
- Fully tested to BS 476 Pt 20:22 and Pt 31.1 cold smoke leakage
- Independently tested on a range of single and double leaf doorsets
- Ideal for humid environments
- High tack self-adhesive backing for quick and easy fitting
- All brushes are black with no plastic fin, reducing noise levels and resistance
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Pack Quantity
10
Size (mm)
10 x 4
Type
Brushes
Length (mm)
2100
Material
Polyvinyl Chloride
- 30 minute fire rated intumescent strip
- Fully tested to BS 476 Pt 20:22 and Pt 31.1 cold smoke leakage
- Independently tested on a range of single and double leaf doorsets
- Ideal for humid environments
- High tack self-adhesive backing for quick and easy fitting
- All brushes are black with no plastic fin, reducing noise levels and resistance
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Pack Quantity
10
Size (mm)
10 x 4
Type
Brushes
Length (mm)
2100
Material
Polyvinyl Chloride
About this product
- Save time when fitting intumescent strips by using the router cutter
- Neatly cuts consistent grooves on doors and frames to make fitting strips easier and quicker
- Suitable for 10mm intumescent strips
- Bearing guide ensures the correct 4mm depth and 10mm width is always achieved to meet Fire Regulations
- PTFE coating to minimise heat and resin build up for increased cutter performance and longevity
- 1/4" shank
Specification & Documentation
Type
Router Cutters
Cutting Depth
4mm
Model
C209X1/4TC
Shank Size (Inches)
1/4
Material
Mild Steel
About this product
- Save time when fitting intumescent strips by using the router cutter
- Neatly cuts consistent grooves on doors and frames to make fitting strips easier and quicker
- Suitable for 10mm intumescent strips
- Bearing guide ensures the correct 4mm depth and 10mm width is always achieved to meet Fire Regulations
- PTFE coating to minimise heat and resin build up for increased cutter performance and longevity
- 1/4" shank
Specification & Documentation
Type
Router Cutters
Cutting Depth
4mm
Model
C209X1/4TC
Shank Size (Inches)
1/4
Material
Mild Steel
- Save time when fitting intumescent strips by using the router cutter
- Neatly cuts consistent grooves on doors and frames to make fitting strips easier and quicker
- Suitable for 15mm intumescent strips
- Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations
- PTFE coating to minimise heat and resin build up for increased cutter performance and longevity
- 1/4" shank
Specification & Documentation
Type
Router Cutters
Cutting Depth
4mm
Model
C220X1/4TC
Shank Size (Inches)
1/4
Material
Mild Steel
- Save time when fitting intumescent strips by using the router cutter
- Neatly cuts consistent grooves on doors and frames to make fitting strips easier and quicker
- Suitable for 15mm intumescent strips
- Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations
- PTFE coating to minimise heat and resin build up for increased cutter performance and longevity
- 1/4" shank
Specification & Documentation
Type
Router Cutters
Cutting Depth
4mm
Model
C220X1/4TC
Shank Size (Inches)
1/4
Material
Mild Steel
About this product
- 30 minute fire rated intumescent strip
- Fully tested to BS 476 Pt 20:22 and Pt 31.1 cold smoke leakage
- Independently tested on a range of single and double leaf doorsets
- Ideal for humid environments
- High tack self-adhesive backing for quick and easy fitting
- All brushes are black with no plastic fin, reducing noise levels and resistance
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
Brown
Fire Rating
30
Pack Quantity
10
Size (mm)
10 x 4
Type
Brushes
Length (mm)
2100
Material
Polyvinyl Chloride
About this product
- 30 minute fire rated intumescent strip
- Fully tested to BS 476 Pt 20:22 and Pt 31.1 cold smoke leakage
- Independently tested on a range of single and double leaf doorsets
- Ideal for humid environments
- High tack self-adhesive backing for quick and easy fitting
- All brushes are black with no plastic fin, reducing noise levels and resistance
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
Brown
Fire Rating
30
Pack Quantity
10
Size (mm)
10 x 4
Type
Brushes
Length (mm)
2100
Material
Polyvinyl Chloride
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Hinge Pads
Material
Graphite
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Hinge Pads
Material
Graphite
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Ball Bearing Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Ball Bearing Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
This product is rated 4.7 out of 5 by other customers
Does the job brilliantly!
Bought this to route grooves for intumescent strips on softwood door frames and doors. Did the job quickly and cleanly. The ballbearing on the bit is large and strong and the cutters made effortless work of the cuts. A good buy.
Just the toolfor the job
I got this to help replace intumescent strips on a number of doors, I have used it now to complete twelve doors and twenty door frames, still as good as when I took it out of the packet.
Perfect
Does exactly what it says on ‘the label’ perfect for my DIY job on two new oak fire door frames.
About this product
- Save time when fitting intumescent strips by using the router cutter
- Neatly cuts consistent grooves on doors and frames to make fitting strips easier and quicker
- Suitable for 10mm intumescent strips
- Bearing guide ensures the correct 4mm depth and 10mm width is always achieved to meet Fire Regulations
- PTFE coating to minimise heat and resin build up for increased cutter performance and longevity
- 1/4" shank
About this product
- Save time when fitting intumescent strips by using the router cutter
- Neatly cuts consistent grooves on doors and frames to make fitting strips easier and quicker
- Suitable for 10mm intumescent strips
- Bearing guide ensures the correct 4mm depth and 10mm width is always achieved to meet Fire Regulations
- PTFE coating to minimise heat and resin build up for increased cutter performance and longevity
- 1/4" shank
Specification & Documentation
Type
Router Cutters
Cutting Depth
4mm
Model
C209X1/4TC
Shank Size (Inches)
1/4
Material
Mild Steel
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
P Boult - 5 years ago
Does the job brilliantly!
Bought this to route grooves for intumescent strips on softwood door frames and doors. Did the job quickly and cleanly. The ballbearing on the bit is large and strong and the cutters made effortless work of the cuts. A good buy.
Was this review helpful?
Verified customer
Johnh Kehoe - 5 years ago
Just the toolfor the job
I got this to help replace intumescent strips on a number of doors, I have used it now to complete twelve doors and twenty door frames, still as good as when I took it out of the packet.
Was this review helpful?
Verified customer
NickD - 6 years ago
Perfect
Does exactly what it says on ‘the label’ perfect for my DIY job on two new oak fire door frames.
Was this review helpful?
Verified customer
John bendana - 6 years ago
Fire door installer
Great buy , I'm very satisfied Very sharp and handy
Was this review helpful?
Verified customer
Mike SGC - 7 years ago
Fit for the job
Great item cut the channels perfectly for the strips
Was this review helpful?
Verified customer
Page 1 of 2
Questions
