SKU: 216690
TIMCO Throughbolt - 10 x 100mm - Pack of 18
0.0
(0)
11 in stock
Throughbolt is a versatile through fixing for use in a wide range of anchoring applications into concrete and some natural stone
£11.50bag 18+ VAT
VAT
Select Size (mm)
Select
Buy in bulk & save up to 4%
Frequently Added:
£7.50
Each + VAT
View bulk savings
1-9
£7.50
10+
£7.50
20+
£7.50
Add
Details
Product code: 774272
£7.50
Each + VAT
View bulk savings
1-9
£7.50
10+
£7.50
20+
£7.50
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports where the post needs to be flush against the wall
- Holds post base above ground level to prevent rot and decay
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
100
Type
Flush Fit Bolt Down
Option
Bolt Secure
Documents
Add to Basket
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports where the post needs to be flush against the wall
- Holds post base above ground level to prevent rot and decay
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
100
Type
Flush Fit Bolt Down
Option
Bolt Secure
Documents
Free returns within 28 days
Frequently bought together
Current item
Main Product
£11.50
Each + VAT
Buy in bulk & save up to 4%
10+
£10.93
Save 4%
Added
Details
Product code: 216690
£11.50
Each + VAT
Buy in bulk & save up to 4%
10+
£10.93
Save 4%
About this product
- Throughbolt is a versatile through fixing for use in a wide range of anchoring applications into concrete and some natural stone
- High performance torque controlled expansion anchor
- Chamfered head design to prevent damage to thread during installation
- Manufactured from grade 5.8 carbon steel with a zinc plated finish
- Easy to use - drill hole through frame into substrate, clean out the hole, set the nut, hammer anchor through fixture and then tighten to the recommended torque
- Special expansion clip for rapid installation
- Note: if no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight
Specification & Documentation
Drill Diameter (mm)
10
Fixing Thickness (mm)
35
Gauge
10mm
Hole Depth (mm)
55
Material
Carbon Steel
Pack Quantity
18
Size (mm)
M10 x 100
Type
Throughbolts & Wallbolts
Length (mm)
100
Documents
Update
Details
Previous Product
Next Product
About this product
- Throughbolt is a versatile through fixing for use in a wide range of anchoring applications into concrete and some natural stone
- High performance torque controlled expansion anchor
- Chamfered head design to prevent damage to thread during installation
- Manufactured from grade 5.8 carbon steel with a zinc plated finish
- Easy to use - drill hole through frame into substrate, clean out the hole, set the nut, hammer anchor through fixture and then tighten to the recommended torque
- Special expansion clip for rapid installation
- Note: if no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight
Specification & Documentation
Drill Diameter (mm)
10
Fixing Thickness (mm)
35
Gauge
10mm
Hole Depth (mm)
55
Material
Carbon Steel
Pack Quantity
18
Size (mm)
M10 x 100
Type
Throughbolts & Wallbolts
Length (mm)
100
Documents
Additional products
£7.69
Each + VAT
View bulk savings
1-9
£7.69
10+
£7.69
20+
£7.69
Added
Details
Product code: 472744
£7.69
Each + VAT
View bulk savings
1-9
£7.69
10+
£7.69
20+
£7.69
About this product
- Designed for use when fence posts are required to be installed on an existing hard surface such as a concrete or wooden base
- Particularly suitable for applications where a fence post requires fitting against a flush surface or mounted on top of an existing wall. Also ideal for fitting in line with the edge of a patio or timberdeck
- Extremely hard wearing and resistant to corrosion due to the dual coating
- Manufactured from heavy duty mild steel which is then zinc plated, with a moisture resistant brown powder coating over the top for ultimate durability
- Protects the fence post from water, fungal and insect damage
- Mechanically tightens around the fence post using the bolts for a secure fit and easy removal of fence post at a later date if required
- The shoe can be used as a template to mark drill hole positions
- Fixings to secure the shoe must be appropriate to the type of material being fastened to
- Size 100 x 100 x 150mm
Specification & Documentation
Dual Coated
Yes
Finish
Brown Powder Coated
Material
Mild Steel
Size (mm)
100 x 100
Type
Flush Fit Bolt Down
Option
Twin Bolt
Documents
Update
Details
Previous Product
Next Product
About this product
- Designed for use when fence posts are required to be installed on an existing hard surface such as a concrete or wooden base
- Particularly suitable for applications where a fence post requires fitting against a flush surface or mounted on top of an existing wall. Also ideal for fitting in line with the edge of a patio or timberdeck
- Extremely hard wearing and resistant to corrosion due to the dual coating
- Manufactured from heavy duty mild steel which is then zinc plated, with a moisture resistant brown powder coating over the top for ultimate durability
- Protects the fence post from water, fungal and insect damage
- Mechanically tightens around the fence post using the bolts for a secure fit and easy removal of fence post at a later date if required
- The shoe can be used as a template to mark drill hole positions
- Fixings to secure the shoe must be appropriate to the type of material being fastened to
- Size 100 x 100 x 150mm
Specification & Documentation
Dual Coated
Yes
Finish
Brown Powder Coated
Material
Mild Steel
Size (mm)
100 x 100
Type
Flush Fit Bolt Down
Option
Twin Bolt
Documents
£7.10
Each + VAT
View bulk savings
1-9
£7.10
10+
£7.10
20+
£7.10
Added
Details
Product code: 597109
£7.10
Each + VAT
View bulk savings
1-9
£7.10
10+
£7.10
20+
£7.10
About this product
- Designed for use when fence posts are required to be installed on an existing hard surface such as a concrete or wooden base
- Ideal for use when building carports, pergolas, fencing, decking and many other applications
- Extremely hard wearing and resistant to corrosion due to the dual coating
- Manufactured from heavy duty mild steel which is then zinc plated, with a moisture resistant brown powder coating over the top for ultimate durability
- Protects the fence post from water, fungal and insect damage
- Twin Bolt design mechanically tightens around the fence post using the bolts for a secure fit and easy removal of fence post at a later date if required
- The shoe can be used as a template to mark drill hole positions
- Fixings to secure the shoe must be appropriate to the type of material being fastened to
- Size 100 x 100 x 150mm
- Measurement between Bolts; 165mm
Specification & Documentation
Dual Coated
Yes
Finish
Brown Powder Coated
Material
Mild Steel
Size (mm)
100 x 100
Type
Bolt Down
Option
Twin Bolt
Update
Details
Previous Product
Next Product
About this product
- Designed for use when fence posts are required to be installed on an existing hard surface such as a concrete or wooden base
- Ideal for use when building carports, pergolas, fencing, decking and many other applications
- Extremely hard wearing and resistant to corrosion due to the dual coating
- Manufactured from heavy duty mild steel which is then zinc plated, with a moisture resistant brown powder coating over the top for ultimate durability
- Protects the fence post from water, fungal and insect damage
- Twin Bolt design mechanically tightens around the fence post using the bolts for a secure fit and easy removal of fence post at a later date if required
- The shoe can be used as a template to mark drill hole positions
- Fixings to secure the shoe must be appropriate to the type of material being fastened to
- Size 100 x 100 x 150mm
- Measurement between Bolts; 165mm
Specification & Documentation
Dual Coated
Yes
Finish
Brown Powder Coated
Material
Mild Steel
Size (mm)
100 x 100
Type
Bolt Down
Option
Twin Bolt
£2.46
Each + VAT
Buy in bulk & save up to 4%
10+
£2.34
Save 4%
Add
Details
Product code: 487306
£2.46
Each + VAT
Buy in bulk & save up to 4%
10+
£2.34
Save 4%
About this product
- Premium quality masonry drill bit
- For use with impact or percussion drills fitted with a standard 1/2" 3 jaw chuck
- High grade industrial carbide tip
- 135° angle point
- Ground flute
- Silver and black finish
- Heat treated
Specification & Documentation
Drill Diameter (mm)
10
Size (mm)
10 x 150
Type
Masonry Drill Bit
Working Length (m)
87
Application
Masonry
Length (mm)
150
Material
Hardened Carbon Steel
Add
Previous Product
Next Product
About this product
- Premium quality masonry drill bit
- For use with impact or percussion drills fitted with a standard 1/2" 3 jaw chuck
- High grade industrial carbide tip
- 135° angle point
- Ground flute
- Silver and black finish
- Heat treated
Specification & Documentation
Drill Diameter (mm)
10
Size (mm)
10 x 150
Type
Masonry Drill Bit
Working Length (m)
87
Application
Masonry
Length (mm)
150
Material
Hardened Carbon Steel
£3.93
Each + VAT
Buy in bulk & save up to 5%
10+
£3.73
Save 5%
Add
Details
Product code: 284153
£3.93
Each + VAT
Buy in bulk & save up to 5%
10+
£3.73
Save 5%
About this product
- Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling even in hard materials
- Ideal for drilling through thin layers of different materials
- For use with a 1/2" 3 jaw chuck
- Diamond ground carbide tip
- 135° angle point
- Ground flute
- Silver and gold finish
- Heat treated
Specification & Documentation
Drill Diameter (mm)
10
Size (mm)
10 x 150
Type
TCT Drill Bit
Working Length (m)
87
Application
Multi Material
Length (mm)
150
Material
Hardened Carbon Steel
Add
Previous Product
Next Product
About this product
- Designed to drill steel, wood, masonry, PVCu, ceramics and concrete. Diamond-ground cutting edges allow fast drilling even in hard materials
- Ideal for drilling through thin layers of different materials
- For use with a 1/2" 3 jaw chuck
- Diamond ground carbide tip
- 135° angle point
- Ground flute
- Silver and gold finish
- Heat treated
Specification & Documentation
Drill Diameter (mm)
10
Size (mm)
10 x 150
Type
TCT Drill Bit
Working Length (m)
87
Application
Multi Material
Length (mm)
150
Material
Hardened Carbon Steel
Price Summary
Main Product Price
£11.5
Add-on(s) Selected 2
£14.79
£7.69 (1)
Edit
ADD PRODUCT
Total price
£26.29
+ VAT
Items you've added
3
(Excludes items already in bag)
Add 3 Item(s) to Your Basket
About this product
- Throughbolt is a versatile through fixing for use in a wide range of anchoring applications into concrete and some natural stone
- High performance torque controlled expansion anchor
- Chamfered head design to prevent damage to thread during installation
- Manufactured from grade 5.8 carbon steel with a zinc plated finish
- Easy to use - drill hole through frame into substrate, clean out the hole, set the nut, hammer anchor through fixture and then tighten to the recommended torque
- Special expansion clip for rapid installation
- Note: if no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight
About this product
- Throughbolt is a versatile through fixing for use in a wide range of anchoring applications into concrete and some natural stone
- High performance torque controlled expansion anchor
- Chamfered head design to prevent damage to thread during installation
- Manufactured from grade 5.8 carbon steel with a zinc plated finish
- Easy to use - drill hole through frame into substrate, clean out the hole, set the nut, hammer anchor through fixture and then tighten to the recommended torque
- Special expansion clip for rapid installation
- Note: if no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight
Specification & Documentation
Drill Diameter (mm)
10
Fixing Thickness (mm)
35
Gauge
10mm
Hole Depth (mm)
55
Material
Carbon Steel
Pack Quantity
18
Size (mm)
M10 x 100
Type
Throughbolts & Wallbolts
Length (mm)
100
Documents
Reviews
Questions
No Questions
Free returns within 28 days