SKU: 465140
TIMCO SDS Plus Chisel - 20 x 250mm
0.0
(0)
10 in stock
For use in rotation stop hammers with the SDS Plus tool holder system
Buy in bulk & save up to 5%
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
20 x 250
Type
SDS Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
20 x 250
Type
SDS Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
40 x 250
Type
SDS Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
40 x 250
Type
SDS Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
250
Type
SDS Plus Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
250
Type
SDS Plus Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
About this product
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
5.5
Size (mm)
5.5 x 160
Type
SDS Plus Hammer Drill Bit
Working Length (m)
100
Application
Masonry
Length (mm)
160
Material
Carbon Steel
Pack Quantity
1
About this product
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
5.5
Size (mm)
5.5 x 160
Type
SDS Plus Hammer Drill Bit
Working Length (m)
100
Application
Masonry
Length (mm)
160
Material
Carbon Steel
Pack Quantity
1
About this product
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
7
Size (mm)
7 x 160
Type
SDS Plus Hammer Drill Bit
Working Length (m)
100
Application
Masonry
Length (mm)
160
Material
Carbon Steel
Pack Quantity
1
About this product
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
7
Size (mm)
7 x 160
Type
SDS Plus Hammer Drill Bit
Working Length (m)
100
Application
Masonry
Length (mm)
160
Material
Carbon Steel
Pack Quantity
1
About this product
- For accurate drilling of glass and ceramics
- Cross ground, spear shaped Tungsten Carbide tip
- Shot blast finish
- NOTE: Drill bit must be used in ROTARY MODE ONLY at a low rpm
- A lubricant such as water or turpentine is recommended when drilling glass
Specification & Documentation
Drill Diameter (mm)
6
Size (mm)
6 x 75
Type
Tile & Glass Drill Bit
Working Length (m)
75
Application
Tile & Glass
Length (mm)
75
Material
Tungsten Carbide
Pack Quantity
1
About this product
- For accurate drilling of glass and ceramics
- Cross ground, spear shaped Tungsten Carbide tip
- Shot blast finish
- NOTE: Drill bit must be used in ROTARY MODE ONLY at a low rpm
- A lubricant such as water or turpentine is recommended when drilling glass
Specification & Documentation
Drill Diameter (mm)
6
Size (mm)
6 x 75
Type
Tile & Glass Drill Bit
Working Length (m)
75
Application
Tile & Glass
Length (mm)
75
Material
Tungsten Carbide
Pack Quantity
1
About this product
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
About this product
- For use in rotation stop hammers with the SDS Plus tool holder system
- Heat treated to eliminte bending
- Shot blast finish for rust protection
- Suitable for use on concrete block, concrete, stone and brick
Specification & Documentation
Size (mm)
20 x 250
Type
SDS Drill Bit
Application
Masonry
Length (mm)
250
Material
Carbon Steel
Pack Quantity
1
Reviews
Questions
