SKU: 693673
TIMCO Drive In Spike - Quick Fit - 75 x 75 x 750mm - Galvanised
4.5
(2)
43 in stock
Quick and easy way to erect fencing and posts - no digging required
£11.64
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
75
Pack Quantity
1
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
75
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Holds post base above ground level to prevent rot and decay
- Fixing plate bolt hole size: M10
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Size (mm)
75
Type
Bolt Down
Option
Bolt Secure
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Holds post base above ground level to prevent rot and decay
- Fixing plate bolt hole size: M10
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Size (mm)
75
Type
Bolt Down
Option
Bolt Secure
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 600
Type
Drive in Spike
Length (mm)
600
Width (mm)
75
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 600
Type
Drive in Spike
Length (mm)
600
Width (mm)
75
Pack Quantity
1
Documents
About this product
- The fence post drive in tool is manufactured from hardened plastic & will prevent the post section from being damaged when being driven in
- Suitable for 75mm fence posts
- Enables rotation of fence post spikes for accurate alignment when fitting
Specification & Documentation
Material
Hardened Plastic
Size (mm)
75
Type
Drive In Tool
Width (mm)
75
Pack Quantity
1
Documents
About this product
- The fence post drive in tool is manufactured from hardened plastic & will prevent the post section from being damaged when being driven in
- Suitable for 75mm fence posts
- Enables rotation of fence post spikes for accurate alignment when fitting
Specification & Documentation
Material
Hardened Plastic
Size (mm)
75
Type
Drive In Tool
Width (mm)
75
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (664893) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
100 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
100
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (664893) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
100 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
100
Pack Quantity
1
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
75
Pack Quantity
1
Documents
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Gerry K - 4 years ago
Quality Product
I bought the Taurus Drive In Spike - Quick Fit - 75 x 75 x 750mm - Galvanised, for some temporary fencing 2-3yrs but needed to be able to reuse it several times over a period of years and judgeing by the quality of the galvanising that will be no problem.
Was this review helpful?
Verified customer
Page 1 of 1
Questions