SKU: 698747
TIMCO Drive In Spike - Quick Fit - 75 x 75 x 600mm - Oxide Red
4.9
(120)
658 in stock
Quick and easy way to erect fencing and posts - no digging required
- Designed to aid in the installation of the 75mm and 100mm twin bolt fence post spikes
- We recommend using a 50mm drive in tool for the easy grip spikes- please contact our sales team who can arrange this as a special order from the supplier
- Protects the shoe whilst hammering into the ground as the tool absorbs the impact of the hammer instead of the shoe being damaged
- This tool should always be used when installing a fence post spike
Specification & Documentation
Finish
Black
Size (mm)
73 x 73 x 200
Type
Drive in Tool
Width (mm)
73
Pack Quantity
1
- Designed to aid in the installation of the 75mm and 100mm twin bolt fence post spikes
- We recommend using a 50mm drive in tool for the easy grip spikes- please contact our sales team who can arrange this as a special order from the supplier
- Protects the shoe whilst hammering into the ground as the tool absorbs the impact of the hammer instead of the shoe being damaged
- This tool should always be used when installing a fence post spike
Specification & Documentation
Finish
Black
Size (mm)
73 x 73 x 200
Type
Drive in Tool
Width (mm)
73
Pack Quantity
1
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 600
Type
Drive in Spike
Length (mm)
600
Width (mm)
75
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 600
Type
Drive in Spike
Length (mm)
600
Width (mm)
75
Documents
About this product
- The fence post drive in tool is manufactured from hardened plastic & will prevent the post section from being damaged when being driven in
- Suitable for 75mm fence posts
- Enables rotation of fence post spikes for accurate alignment when fitting
Specification & Documentation
About this product
- The fence post drive in tool is manufactured from hardened plastic & will prevent the post section from being damaged when being driven in
- Suitable for 75mm fence posts
- Enables rotation of fence post spikes for accurate alignment when fitting
Specification & Documentation
- Corrosion resistant treated decking screws at unbeatable value
- These screws feature a sharp point and thread for ease of driving and reduced splitting
Specification & Documentation
Bit Size
PZ2
Finish
Green
Gauge
4.5
Head Type
Pozi
Pack Quantity
200
Size (mm)
4.5 x 50
Length (mm)
50
Material
Carbon Steel
Documents
- Corrosion resistant treated decking screws at unbeatable value
- These screws feature a sharp point and thread for ease of driving and reduced splitting
Specification & Documentation
Bit Size
PZ2
Finish
Green
Gauge
4.5
Head Type
Pozi
Pack Quantity
200
Size (mm)
4.5 x 50
Length (mm)
50
Material
Carbon Steel
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports
- Holds post base above ground level to prevent rot and decay
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
75
Type
Bolt Down
Option
Quick Fit
Pack Quantity
1
Documents
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports
- Holds post base above ground level to prevent rot and decay
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
75
Type
Bolt Down
Option
Quick Fit
Pack Quantity
1
Documents
About this product
- Creates a perfect decorative finish for the top of fence posts
- Protects the top of the fence post from rot and decay
Specification & Documentation
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
75
Type
Post Cap
Pack Quantity
1
About this product
- Creates a perfect decorative finish for the top of fence posts
- Protects the top of the fence post from rot and decay
Specification & Documentation
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
75
Type
Post Cap
Pack Quantity
1
This product is rated 4.9 out of 5 by other customers
Good communication and service excellent value
Product as described excellent quality, delivered on time
Good value for money
Done the job well,saved digging holes buying cement,just had to cut them down a little as 2Ft long were just a bit too long, (didn't want to hit any pipes or cables!!)
Great company
Fast delivery , good product, cheap ,what more do you need.
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Inverted fins in the post holder section enable a quick fit and holds the post base in a vice like grip
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Option
Without Bolts
Size (mm)
75 x 600
Type
Drive in Spike
Length (mm)
600
Width (mm)
75
Pack Quantity
1
Documents
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Paul PXAM - 1 year ago
Good communication and service excellent value
Product as described excellent quality, delivered on time
Was this review helpful?
Verified customer
Anonymous - 3 years ago
Good value for money
Done the job well,saved digging holes buying cement,just had to cut them down a little as 2Ft long were just a bit too long, (didn't want to hit any pipes or cables!!)
Was this review helpful?
Verified customer
Anonymous - 3 years ago
Great company
Fast delivery , good product, cheap ,what more do you need.
Was this review helpful?
Verified customer
Anonymous - 3 years ago
Good Service
Very good to deal with. One item went missing during delivery but was quickly replaced.
Was this review helpful?
Verified customer
jkb1 - 3 years ago
Well built spikes
Bought these to put up garden panels and they are well built and went into the ground very well, time will tell if they are prone to rusting but I think that will be after my time here lol I am happy with them
Was this review helpful?
Verified customer
Page 1 of 13
Questions
B Dale - 5 years ago
Category Manager
Hello, You drive the wood in. There is no need to cut grooves. Thank you
Was this question helpful?
Vinny - 5 years ago
Category Manager
Hello, This would work but would need packing out. Thank you
Was this question helpful?
Kyri - 5 years ago
Category Manager
Hello, It would be a case of using some force to remove the post. May be worth waiting for drier weather so the wood isn't swollen. Thank you
Was this question helpful?
Page 1 of 2
