SKU: 661406
TIMCO Drive In Spike - Bolt Secure - 100 x 100 x 750mm - Galvanised
4.5
(15)
41 in stock
Quick and easy way to erect fencing and posts - no digging required
About this product
- The fence post drive in tool is manufactured from hardened plastic & will prevent the post section from being damaged when being driven in
- Suitable for 100mm fence posts
- Enables rotation of fence post spikes for accurate alignment when fitting
Specification & Documentation
Material
Hardened Plastic
Size (mm)
100
Type
Drive In Tool
Width (mm)
100
About this product
- The fence post drive in tool is manufactured from hardened plastic & will prevent the post section from being damaged when being driven in
- Suitable for 100mm fence posts
- Enables rotation of fence post spikes for accurate alignment when fitting
Specification & Documentation
Material
Hardened Plastic
Size (mm)
100
Type
Drive In Tool
Width (mm)
100
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- Installation using the drive in tool (664893) is recommended to prevent damage to the metal shoe
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Bolt secure system clamps the fence post base firmly into the holder and allows for easy fence post adjustment or removal at a later stage
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
With Bolts
Size (mm)
100 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
100
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- Installation using the drive in tool (664893) is recommended to prevent damage to the metal shoe
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Bolt secure system clamps the fence post base firmly into the holder and allows for easy fence post adjustment or removal at a later stage
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
With Bolts
Size (mm)
100 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
100
Documents
About this product
- Designed to aid in the installation of the 75mm and 100mm twin bolt fence post spikes
- We recommend using a 50mm drive in tool for the easy grip spikes- please contact our sales team who can arrange this as a special order from the supplier
- Protects the shoe whilst hammering into the ground as the tool absorbs the impact of the hammer instead of the shoe being damaged
- This tool should always be used when installing a fence post spike
Specification & Documentation
Finish
Black
Size (mm)
73 x 73 x 200
Type
Drive in Tool
Width (mm)
73
About this product
- Designed to aid in the installation of the 75mm and 100mm twin bolt fence post spikes
- We recommend using a 50mm drive in tool for the easy grip spikes- please contact our sales team who can arrange this as a special order from the supplier
- Protects the shoe whilst hammering into the ground as the tool absorbs the impact of the hammer instead of the shoe being damaged
- This tool should always be used when installing a fence post spike
Specification & Documentation
Finish
Black
Size (mm)
73 x 73 x 200
Type
Drive in Tool
Width (mm)
73
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Bolt secure system clamps the fence post base firmly into the holder and allows for easy fence post adjustment or removal at a later stage
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
With Bolts
Size (mm)
75 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
75
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- Installation using the drive in tool (984143) is recommended to prevent damage to the metal shoe
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Bolt secure system clamps the fence post base firmly into the holder and allows for easy fence post adjustment or removal at a later stage
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
With Bolts
Size (mm)
75 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
75
Documents
About this product
- Corrosion resistant treated decking screws at unbeatable value
- These screws feature a sharp point and thread for ease of driving and reduced splitting
Specification & Documentation
Bit Size
PZ2
Finish
Green
Gauge
4.5
Head Type
Pozi
Pack Quantity
200
Size (mm)
4.5 x 75
Length (mm)
75
Material
Carbon Steel
Documents
About this product
- Corrosion resistant treated decking screws at unbeatable value
- These screws feature a sharp point and thread for ease of driving and reduced splitting
Specification & Documentation
Bit Size
PZ2
Finish
Green
Gauge
4.5
Head Type
Pozi
Pack Quantity
200
Size (mm)
4.5 x 75
Length (mm)
75
Material
Carbon Steel
Documents
About this product
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
About this product
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
This product is rated 4.5 out of 5 by other customers
Great and look like new after 3 years..
These are best 100mm post I have ever used very strong.
Exceeded expectations.
Product appears strong and up to the job and should last well.
just what was required
needed to replace fencing this way could be easier
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- Installation using the drive in tool (664893) is recommended to prevent damage to the metal shoe
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Bolt secure system clamps the fence post base firmly into the holder and allows for easy fence post adjustment or removal at a later stage
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Four fin steel spike ensures a solid, permanent, wind resistant fit
- Holds fence post base above ground level to prevent rot and decay
- Installation using the drive in tool (664893) is recommended to prevent damage to the metal shoe
- For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike
- Bolt secure system clamps the fence post base firmly into the holder and allows for easy fence post adjustment or removal at a later stage
Specification & Documentation
Finish
Galvanised
Material
Carbon Steel
Option
With Bolts
Size (mm)
100 x 750
Type
Drive in Spike
Length (mm)
750
Width (mm)
100
Documents
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Anonymous - 2 years ago
Great and look like new after 3 years..
These are best 100mm post I have ever used very strong.
Was this review helpful?
Verified customer
Landscaper - 3 years ago
Drive in fence spike
It’s galvanised well. Hot dipped Only thing I’d say is the welding which joins the spike to the post cup looks quite weak just little tacks, which is a shame because ordering the galvanised one you’d want it last
Was this review helpful?
Verified customer
NMNS - 4 years ago
Exceeded expectations.
Product appears strong and up to the job and should last well.
Was this review helpful?
Verified customer
ngcockroft - 4 years ago
just what was required
needed to replace fencing this way could be easier
Was this review helpful?
Verified customer
Anonymous - 4 years ago
Perfect for the job.
Bought 16 drive on spikes across 2 different deliveries. Each delivery arrived within 24hrs to Aberdeenshire.
Was this review helpful?
Verified customer
Page 1 of 2
Questions
