SKU: 365110
Simpson Strong Tie Universal Extension Wall Starter - 2236 x 33mm - Stainless Steel
4.8
(6)
49 in stock
Simpson StrongTie Part Code: C2KS
Buy in bulk & save up to 5%
- Simpson StrongTie Part Code: JHA270/91
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
234 x 91 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
- Simpson StrongTie Part Code: JHA270/91
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
234 x 91 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
About this product
- Simpson StrongTie Part Code: C2KS
- Wall extension profiles are designed for tying-in new walls to existing masonry walls/columns
- Sometimes referred to as crocodile wall extension profiles
- Ideal for use with most brick and block modules
- Wall extension profiles provide lateral support to masonry wall panels in conversion, extension and new building work
- Features snap out ties which can be positioned anywhere along the channel for a universal fit
- BBA approved for up to 8m, 3 storey work
- Accommodates 10mm of vertical movement
- All fixings and ties provided
Specification & Documentation
Finish
Galvanised
Type
Extension Wall Starter
Size (mm)
2236 x 33
Material
304 Stainless Steel
Pack Quantity
1
About this product
- Simpson StrongTie Part Code: C2KS
- Wall extension profiles are designed for tying-in new walls to existing masonry walls/columns
- Sometimes referred to as crocodile wall extension profiles
- Ideal for use with most brick and block modules
- Wall extension profiles provide lateral support to masonry wall panels in conversion, extension and new building work
- Features snap out ties which can be positioned anywhere along the channel for a universal fit
- BBA approved for up to 8m, 3 storey work
- Accommodates 10mm of vertical movement
- All fixings and ties provided
Specification & Documentation
Finish
Galvanised
Type
Extension Wall Starter
Size (mm)
2236 x 33
Material
304 Stainless Steel
Pack Quantity
1
About this product
- Simpson StrongTie Part Code: WTS4-225
- Type 4 wall ties are suitable for box-form dwellings up to 10 metres high with leaves of similar thickness, including internal separating cavity walls
- They are designed for use in flat sites in towns and cities where the basic wind speed does not exceed 25m/s and the altitude is not more than 150m above sea level
- Light duty
- Meets the requirements of Approved Document E: Resistance to the Passage of Sound and are suitable for use in separating party walls of new build attached dwellings
Specification & Documentation
CE Rated
Yes
Finish
Stainless Steel
Type
Wall Tie
Size (mm)
225 x 2.3
Pack Quantity
250
Material
304 Stainless Steel
Option
Type 4 Wall Tie
Diameter (mm)
2.3
About this product
- Simpson StrongTie Part Code: WTS4-225
- Type 4 wall ties are suitable for box-form dwellings up to 10 metres high with leaves of similar thickness, including internal separating cavity walls
- They are designed for use in flat sites in towns and cities where the basic wind speed does not exceed 25m/s and the altitude is not more than 150m above sea level
- Light duty
- Meets the requirements of Approved Document E: Resistance to the Passage of Sound and are suitable for use in separating party walls of new build attached dwellings
Specification & Documentation
CE Rated
Yes
Finish
Stainless Steel
Type
Wall Tie
Size (mm)
225 x 2.3
Pack Quantity
250
Material
304 Stainless Steel
Option
Type 4 Wall Tie
Diameter (mm)
2.3
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
4.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
4.0 x 50
CE Rated
Yes
Type
Countersunk
Length (mm)
50
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
4.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
4.0 x 50
CE Rated
Yes
Type
Countersunk
Length (mm)
50
Range
Solo Chippy
Material
Carbon Steel
Documents
- Simpson StrongTie Part Code: H10B10
- 100mm Bend
- This heavy duty restraint strap is a direct replacement for traditional 2.5mm and 5mm thick restraint straps
- These heavy duty restraint straps replace traditional heavy and light restraint straps in roof and floor construction
- Formed edge design gives additional strength on bend
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
1000 x 28 x 4.2
Thickness (mm)
4.2
Type
Restraint Strap
Option
100mm Bend
Material
Galvanised Steel
Duty
Heavy
Pack Quantity
1
- Simpson StrongTie Part Code: H10B10
- 100mm Bend
- This heavy duty restraint strap is a direct replacement for traditional 2.5mm and 5mm thick restraint straps
- These heavy duty restraint straps replace traditional heavy and light restraint straps in roof and floor construction
- Formed edge design gives additional strength on bend
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
1000 x 28 x 4.2
Thickness (mm)
4.2
Type
Restraint Strap
Option
100mm Bend
Material
Galvanised Steel
Duty
Heavy
Pack Quantity
1
This product is rated 4.8 out of 5 by other customers
Fit for purpose, good value
Fit for purpose quick delivery. Happy with product
Perfect!!
Use these all the time, great value for money, no problems at all.
Number one choice
Simpson, straight forward, no messing, quality, products. No need to look at the competition, you'll be wasting your time.
About this product
- Simpson StrongTie Part Code: C2KS
- Wall extension profiles are designed for tying-in new walls to existing masonry walls/columns
- Sometimes referred to as crocodile wall extension profiles
- Ideal for use with most brick and block modules
- Wall extension profiles provide lateral support to masonry wall panels in conversion, extension and new building work
- Features snap out ties which can be positioned anywhere along the channel for a universal fit
- BBA approved for up to 8m, 3 storey work
- Accommodates 10mm of vertical movement
- All fixings and ties provided
About this product
- Simpson StrongTie Part Code: C2KS
- Wall extension profiles are designed for tying-in new walls to existing masonry walls/columns
- Sometimes referred to as crocodile wall extension profiles
- Ideal for use with most brick and block modules
- Wall extension profiles provide lateral support to masonry wall panels in conversion, extension and new building work
- Features snap out ties which can be positioned anywhere along the channel for a universal fit
- BBA approved for up to 8m, 3 storey work
- Accommodates 10mm of vertical movement
- All fixings and ties provided
Specification & Documentation
Finish
Galvanised
Type
Extension Wall Starter
Size (mm)
2236 x 33
Material
304 Stainless Steel
Pack Quantity
1
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Tracy1 - 3 years ago
Fit for purpose, good value
Fit for purpose quick delivery. Happy with product
Was this review helpful?
Verified customer
Builder359 - 4 years ago
Perfect!!
Use these all the time, great value for money, no problems at all.
Was this review helpful?
Verified customer
Anonymous - 4 years ago
Number one choice
Simpson, straight forward, no messing, quality, products. No need to look at the competition, you'll be wasting your time.
Was this review helpful?
Verified customer
Anonymous - 4 years ago
Right for the job
Ordered it Friday night for Monday. Arrived on time. Perfect
Was this review helpful?
Verified customer
Page 1 of 1
Questions
