SKU: 747350
Simpson Strong Tie Masonry Joist Hanger for Solid Joists - 200 x 91mm
4.8
(4)
73 in stock
JHM masonry hangers (part code JHM200/91) are designed for supporting timber joists, beams and trussed rafters from masonry walls
Select Size (mm)
- JHM masonry hangers (part code JHM200/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
200 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
47
Duty
Heavy
- JHM masonry hangers (part code JHM200/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
200 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
47
Duty
Heavy
- JHM masonry hangers (part code JHM200/91) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
200 x 91 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
91
Duty
Heavy
- JHM masonry hangers (part code JHM200/91) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
200 x 91 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
91
Duty
Heavy
- A galvanised joist hanger (part code JHA270/91) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
234 x 91 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
234
Width (mm)
91
- A galvanised joist hanger (part code JHA270/91) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
234 x 91 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
234
Width (mm)
91
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
About this product
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
About this product
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- JHM masonry hangers (part code JHM200/91) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
About this product
- JHM masonry hangers (part code JHM200/91) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
200 x 91 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
91
Duty
Heavy
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Jayy - 3 years ago
A+ service
Good service... delivered on time. Will us these guys again
Was this review helpful?
Verified customer
Page 1 of 1
Questions
