SKU: 148984
Simpson Strong Tie Masonry Joist Hanger for Solid Joists - 200 x 75mm
5.0
(2)
98 in stock
JHM masonry hangers (part code JHM200/75) are designed for supporting timber joists, beams and trussed rafters from masonry walls
Select Size (mm)
Buy in bulk & save up to 5%
About this product
- JHM masonry hangers (part code JHM200/75) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
200 x 75 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
75
Duty
Heavy
About this product
- JHM masonry hangers (part code JHM200/75) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
200 x 75 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
75
Duty
Heavy
- JHM masonry hangers (part code JHM200/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
200 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
47
Duty
Heavy
- JHM masonry hangers (part code JHM200/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
200 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
47
Duty
Heavy
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 70
Type
Countersunk
Length (mm)
70
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 70
Type
Countersunk
Length (mm)
70
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Type
Countersunk
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 50
Length (mm)
50
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Type
Countersunk
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 50
Length (mm)
50
Range
Solo Chippy
Material
Carbon Steel
Documents
- Heavy-duty face fixed 'U' joist hangers (part code SAE380/75/2/25) designed for applications requiring additional strength
- Quick and simple installation - hangers are nailed using square twist nails but have bolt holes for 12mm fasteners into the face
- For use with solid sawn timber joists, steel and purlins
- Timber bolted capacity to be determined according to the relevant standards
- The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
152 x 75 x 2
Material
Galvanised Steel
Duty
Heavy
Option
Face Fixed U
Pack Quantity
1
Height (mm)
152
Width (mm)
75
- Heavy-duty face fixed 'U' joist hangers (part code SAE380/75/2/25) designed for applications requiring additional strength
- Quick and simple installation - hangers are nailed using square twist nails but have bolt holes for 12mm fasteners into the face
- For use with solid sawn timber joists, steel and purlins
- Timber bolted capacity to be determined according to the relevant standards
- The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
152 x 75 x 2
Material
Galvanised Steel
Duty
Heavy
Option
Face Fixed U
Pack Quantity
1
Height (mm)
152
Width (mm)
75
About this product
- JHM masonry hangers (part code JHM200/75) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
About this product
- JHM masonry hangers (part code JHM200/75) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
200 x 75 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
200
Width (mm)
75
Duty
Heavy
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Joe Builder - 5 years ago
excellent, fast customer service!
simple product works a treat! robust and well made with a good finish.
Was this review helpful?
Verified customer
Page 1 of 1
Questions
Mick Venables - 4 years ago
Layla
Good Morning, I hope you are well, Any of the below will be absolutely fine depending on the length you require: https://www.ironmongerydirect.co.uk/search?query=concrete%20screw I hope this helps Have a lovely day
Was this question helpful?
Page 1 of 1
