SKU: 893180
Simpson Strong Tie Masonry Joist Hanger for Solid Joists - 125 x 47mm
4.3
(3)
66 in stock
JHM masonry hangers (part code JHM125/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
Select Size (mm)
Buy in bulk & save up to 4%
- JHM masonry hangers (part code JHM125/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
125 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
125
Width (mm)
47
Duty
Heavy
- JHM masonry hangers (part code JHM125/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
125 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
125
Width (mm)
47
Duty
Heavy
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
About this product
- For use in medium weight applications in brickwork, blockwork and masonry
- Through fixing, allows drilling through pre-positioned fixture
- No marking out required
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
12
Fixing Thickness (mm)
44
Gauge
M10
Hole Depth (mm)
55
Material
Galvanised Steel
Pack Quantity
25
Size (mm)
M10 x 100
Type
Sleeve Anchors
Length (mm)
100
Documents
About this product
- For use in medium weight applications in brickwork, blockwork and masonry
- Through fixing, allows drilling through pre-positioned fixture
- No marking out required
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
12
Fixing Thickness (mm)
44
Gauge
M10
Hole Depth (mm)
55
Material
Galvanised Steel
Pack Quantity
25
Size (mm)
M10 x 100
Type
Sleeve Anchors
Length (mm)
100
Documents
About this product
- Traditional hex nuts can be used in all bolting and fastening applications
- Standard metric coarse thread
- Zinc plated for internal use
- Conforms to DIN934
- Supplied in a re-sealable bag for easy storage & protection
- Sold in packs of 10
Specification & Documentation
Finish
Bright Zinc Plated
Pack Quantity
10
Size (mm)
M12
Type
Nuts
Length (mm)
1000
Material
Carbon Steel
About this product
- Traditional hex nuts can be used in all bolting and fastening applications
- Standard metric coarse thread
- Zinc plated for internal use
- Conforms to DIN934
- Supplied in a re-sealable bag for easy storage & protection
- Sold in packs of 10
Specification & Documentation
Finish
Bright Zinc Plated
Pack Quantity
10
Size (mm)
M12
Type
Nuts
Length (mm)
1000
Material
Carbon Steel
About this product
- Strong angle bracket sold for many different applications from construction to furniture manufacturers
Specification & Documentation
Finish
Zinc Plated
Option
Angle
Pack Quantity
10
Size (mm)
20 x 29 x 20
Type
Bracket
Width (mm)
29
Length (mm)
20
Material
Mild Steel
Documents
About this product
- Strong angle bracket sold for many different applications from construction to furniture manufacturers
Specification & Documentation
Finish
Zinc Plated
Option
Angle
Pack Quantity
10
Size (mm)
20 x 29 x 20
Type
Bracket
Width (mm)
29
Length (mm)
20
Material
Mild Steel
Documents
About this product
- For improved bolt performance in timber
- Mild Steel
- Galvanised
- M12
- Conforms to BS EN 912-2000
Specification & Documentation
Diameter (mm)
63
Pack Quantity
50
Size (mm)
63 x 1.2
Thickness (mm)
1
Type
Timber Connector
CE Rated
Yes
Option
Double Sided
Material
Mild Steel
Documents
About this product
- For improved bolt performance in timber
- Mild Steel
- Galvanised
- M12
- Conforms to BS EN 912-2000
Specification & Documentation
Diameter (mm)
63
Pack Quantity
50
Size (mm)
63 x 1.2
Thickness (mm)
1
Type
Timber Connector
CE Rated
Yes
Option
Double Sided
Material
Mild Steel
Documents
About this product
- JHM masonry hangers (part code JHM125/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
About this product
- JHM masonry hangers (part code JHM125/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
Size (mm)
125 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
125
Width (mm)
47
Duty
Heavy
Reviews
Questions
