SKU: 147791
Simpson Strong Tie Masonry Joist Hanger for Solid Joists - 100 x 47mm
4.6
(19)
269 in stock
JHM masonry hangers (part code JHM100/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
Select Size (mm)
Buy in bulk & save up to 5%
About this product
- JHM masonry hangers (part code JHM100/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
100 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
100
Width (mm)
47
Duty
Heavy
About this product
- JHM masonry hangers (part code JHM100/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
100 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
100
Width (mm)
47
Duty
Heavy
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 80
Type
Countersunk
Length (mm)
80
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 80
Type
Countersunk
Length (mm)
80
Range
Solo Chippy
Material
Carbon Steel
Documents
- Reinforced angle brackets (part code ABR90) are suitable for structural applications in framing and wood-frame houses
- Suitable for use on solid wood, glued-laminate wood, concrete, steel and composite lumber
- Ideal for fastening small trusses, cladding plates, cladding uprights, rafter anchors and many others
- Made from electro-galvanized steel for durability
Specification & Documentation
Finish
Galvanised
Size (mm)
90 x 90 x 65
Thickness (mm)
2.5
Type
Angle Bracket
CE Rated
Yes
Material
Galvanised Steel
Option
Reinforced
Pack Quantity
1
Height (mm)
90
Width (mm)
65
- Reinforced angle brackets (part code ABR90) are suitable for structural applications in framing and wood-frame houses
- Suitable for use on solid wood, glued-laminate wood, concrete, steel and composite lumber
- Ideal for fastening small trusses, cladding plates, cladding uprights, rafter anchors and many others
- Made from electro-galvanized steel for durability
Specification & Documentation
Finish
Galvanised
Size (mm)
90 x 90 x 65
Thickness (mm)
2.5
Type
Angle Bracket
CE Rated
Yes
Material
Galvanised Steel
Option
Reinforced
Pack Quantity
1
Height (mm)
90
Width (mm)
65
About this product
- Adjustable angle brackets (part code EFIXR753C50) made for the design and installation of interior and exterior joinery
- Improves rigidity, especially for large models
- Suitable for use with wood, concrete, metal and many other materials
- Ideal for frames and storage cabinets
- Easy adjustment using the 2 slots
- Made from electro-galvanized steel for durability
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
70 x 50 x 30
Thickness (mm)
2
Type
Angle Bracket
Material
Galvanised Steel
Option
Adjustable
Pack Quantity
1
Height (mm)
70
Width (mm)
30
Documents
About this product
- Adjustable angle brackets (part code EFIXR753C50) made for the design and installation of interior and exterior joinery
- Improves rigidity, especially for large models
- Suitable for use with wood, concrete, metal and many other materials
- Ideal for frames and storage cabinets
- Easy adjustment using the 2 slots
- Made from electro-galvanized steel for durability
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
70 x 50 x 30
Thickness (mm)
2
Type
Angle Bracket
Material
Galvanised Steel
Option
Adjustable
Pack Quantity
1
Height (mm)
70
Width (mm)
30
Documents
This product is rated 4.6 out of 5 by other customers
Perfect
Perfect. Worked really well, and nice and strong
Joist hanger purchase
Very happy with the service, delivery and quality, will use them again
Done the job Perfect.
Great product and great value. Would recommend this product to anybody. Also delivery was very quick
About this product
- JHM masonry hangers (part code JHM100/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
About this product
- JHM masonry hangers (part code JHM100/47) are designed for supporting timber joists, beams and trussed rafters from masonry walls
- Built-in inspection slot at the base of the joist hanger to aid inspection from the ground
- Heavy duty masonry joist hanger for higher load carrying capacity
- Top flange provides widest area in contact with masonry support allowing superior performance
- Embossments stiffen top flange and the holes allow improved mortar keying
Specification & Documentation
Finish
Galvanised
Thickness (mm)
2
Type
Joist Hanger
CE Rated
Yes
Size (mm)
100 x 47 x 2
Material
Galvanised Steel
Option
For Solid Joists
Pack Quantity
1
Height (mm)
100
Width (mm)
47
Duty
Heavy
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
LeeC - 3 years ago
Perfect
Perfect. Worked really well, and nice and strong
Was this review helpful?
Verified customer
Gordon1 - 4 years ago
Joist hanger purchase
Very happy with the service, delivery and quality, will use them again
Was this review helpful?
Verified customer
Ashley s - 4 years ago
Done the job Perfect.
Great product and great value. Would recommend this product to anybody. Also delivery was very quick
Was this review helpful?
Verified customer
PeteGC - 4 years ago
Masonry joist hangers
Bought for suspended floor of new brick shed base. Pefect. Solid and good value.
Was this review helpful?
Verified customer
Daz2020 - 4 years ago
Good Quality For The Money!
Perfect for the project i am doing at the moment. Fantastic build quality for the money. Very Impressed.
Was this review helpful?
Verified customer
Page 1 of 2
Questions
