SKU: 343898
Simpson Strong Tie Heavy Duty Restraint Strap - 600 x 28 x 4.2mm - 100mm Bend
5.0
(3)
38 in stock
Simpson StrongTie Part Code: H06B10
Select Option
Select Size (mm)
Buy in bulk & save up to 5%
About this product
- Simpson StrongTie Part Code: H06B10
- 100mm Bend
- This heavy duty restraint strap is a direct replacement for traditional 2.5mm and 5mm thick restraint straps
- These heavy duty restraint straps replace traditional heavy and light restraint straps in roof and floor construction
- Formed edge design gives additional strength on bend
- Quicker to install - can fit over top of floor joists and truss bottom chords without the need for notching due to the 1.5mm thickness
- Easier to course with blockwork
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
600 x 28 x 4.2
Thickness (mm)
4.2
Type
Restraint Strap
Option
100mm Bend
Material
Galvanised Steel
Duty
Heavy
About this product
- Simpson StrongTie Part Code: H06B10
- 100mm Bend
- This heavy duty restraint strap is a direct replacement for traditional 2.5mm and 5mm thick restraint straps
- These heavy duty restraint straps replace traditional heavy and light restraint straps in roof and floor construction
- Formed edge design gives additional strength on bend
- Quicker to install - can fit over top of floor joists and truss bottom chords without the need for notching due to the 1.5mm thickness
- Easier to course with blockwork
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
600 x 28 x 4.2
Thickness (mm)
4.2
Type
Restraint Strap
Option
100mm Bend
Material
Galvanised Steel
Duty
Heavy
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
About this product
- Simpson StrongTie Part Code:E2/2,5/7090
- Reinforced angle brackets suitable for structural applications in framing and wood-frame houses
- Ideal for fastening small trusses, cladding plates, cladding uprights, rafter anchors and many others
Specification & Documentation
Finish
Galvanised
Size (mm)
90 x 90 x 65
Thickness (mm)
2.5
Type
Angle Bracket
CE Rated
Yes
Material
Galvanised Steel
Option
Reinforced
About this product
- Simpson StrongTie Part Code:E2/2,5/7090
- Reinforced angle brackets suitable for structural applications in framing and wood-frame houses
- Ideal for fastening small trusses, cladding plates, cladding uprights, rafter anchors and many others
Specification & Documentation
Finish
Galvanised
Size (mm)
90 x 90 x 65
Thickness (mm)
2.5
Type
Angle Bracket
CE Rated
Yes
Material
Galvanised Steel
Option
Reinforced
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
40
Pack Size
2.5kg
Size (mm)
3.75 x 40
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
40
Pack Size
2.5kg
Size (mm)
3.75 x 40
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Simpson StrongTie Part Code: E9S/2,5
- Reinforced angle brackets suitable for structural applications in framing and wood-frame houses
- Ideal for fastening small trusses, cladding plates, cladding uprights, rafter anchors and many others
Specification & Documentation
Finish
Galvanised
Size (mm)
150 x 90 x 65
Thickness (mm)
2.5
Type
Angle Bracket
CE Rated
Yes
Material
Galvanised Steel
Option
Reinforced
Documents
- Simpson StrongTie Part Code: E9S/2,5
- Reinforced angle brackets suitable for structural applications in framing and wood-frame houses
- Ideal for fastening small trusses, cladding plates, cladding uprights, rafter anchors and many others
Specification & Documentation
Finish
Galvanised
Size (mm)
150 x 90 x 65
Thickness (mm)
2.5
Type
Angle Bracket
CE Rated
Yes
Material
Galvanised Steel
Option
Reinforced
Documents
About this product
- Used in a wide variety of applications & situations
- Commonly used in architectural metalwork, marine applications, model making, furniture (garden & home) & many others
Specification & Documentation
Finish
Bright Zinc Plated
Pack Quantity
8
Size (mm)
M12 x 50
Type
Washers
Length (mm)
50
Material
Mild Steel
About this product
- Used in a wide variety of applications & situations
- Commonly used in architectural metalwork, marine applications, model making, furniture (garden & home) & many others
Specification & Documentation
Finish
Bright Zinc Plated
Pack Quantity
8
Size (mm)
M12 x 50
Type
Washers
Length (mm)
50
Material
Mild Steel
This product is rated 5.0 out of 5 by other customers
strong Tie
Used under concrete lay to tie ground level walls to base. Also used to tie roof. Needed to be strong as live on hill in northern scotland where winds are excessive. Used 24.
Decent quality and cheaper than other places
Perfect for a bit of reinforcement for the stud work for a breakfast bar. Good thickness and wont be going anywhere soon.
Just what I needed
Needed a long strong bracket for an usual job I am doing. Perfect for the job at very reasonable price.
About this product
- Simpson StrongTie Part Code: H06B10
- 100mm Bend
- This heavy duty restraint strap is a direct replacement for traditional 2.5mm and 5mm thick restraint straps
- These heavy duty restraint straps replace traditional heavy and light restraint straps in roof and floor construction
- Formed edge design gives additional strength on bend
- Quicker to install - can fit over top of floor joists and truss bottom chords without the need for notching due to the 1.5mm thickness
- Easier to course with blockwork
About this product
- Simpson StrongTie Part Code: H06B10
- 100mm Bend
- This heavy duty restraint strap is a direct replacement for traditional 2.5mm and 5mm thick restraint straps
- These heavy duty restraint straps replace traditional heavy and light restraint straps in roof and floor construction
- Formed edge design gives additional strength on bend
- Quicker to install - can fit over top of floor joists and truss bottom chords without the need for notching due to the 1.5mm thickness
- Easier to course with blockwork
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Size (mm)
600 x 28 x 4.2
Thickness (mm)
4.2
Type
Restraint Strap
Option
100mm Bend
Material
Galvanised Steel
Duty
Heavy
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Anonymous - 5 years ago
strong Tie
Used under concrete lay to tie ground level walls to base. Also used to tie roof. Needed to be strong as live on hill in northern scotland where winds are excessive. Used 24.
Was this review helpful?
Verified customer
Dan ween - 5 years ago
Decent quality and cheaper than other places
Perfect for a bit of reinforcement for the stud work for a breakfast bar. Good thickness and wont be going anywhere soon.
Was this review helpful?
Verified customer
Robert SF - 5 years ago
Just what I needed
Needed a long strong bracket for an usual job I am doing. Perfect for the job at very reasonable price.
Was this review helpful?
Verified customer
Page 1 of 1
Questions
