SKU: 171267
Securefast Touch Free Exit Button - 85 x 85 x 31mm - Stainless Steel
0.0
(0)
3 in stock
No Touch / Touch Free switch is designed for areas where hygiene is of greatest importance and comes complete with green surface box, but can also be fitted flush
- No Touch / Touch Free switch is designed for areas where hygiene is of greatest importance and comes complete with green surface box, but can also be fitted flush
- The switch is supplied with a stainless steel face plate and plastic back box for surface
- installation
- Easy to install and use the switch offers 12 or 24V DC power input with a 3A 230V relay output
- Suitable for medium to high traffic applications
- Delay timer 1-15 seconds
- Dual led indicator light
- Single gang fixings
Specification & Documentation
Depth (mm)
31
Length (mm)
85
Size (mm)
85 x 85 x 31
Supply Voltage (VAC)/VDC
12/24
Type
Exit Switch/Button
Width (mm)
85
Material
304 Stainless Steel
Documents
- No Touch / Touch Free switch is designed for areas where hygiene is of greatest importance and comes complete with green surface box, but can also be fitted flush
- The switch is supplied with a stainless steel face plate and plastic back box for surface
- installation
- Easy to install and use the switch offers 12 or 24V DC power input with a 3A 230V relay output
- Suitable for medium to high traffic applications
- Delay timer 1-15 seconds
- Dual led indicator light
- Single gang fixings
Specification & Documentation
Depth (mm)
31
Length (mm)
85
Size (mm)
85 x 85 x 31
Supply Voltage (VAC)/VDC
12/24
Type
Exit Switch/Button
Width (mm)
85
Material
304 Stainless Steel
Documents
- Use in an emergency to open electronic access doors
- May be surface or flush mounted
- Single pole change over contact
- Supplied with 1 reset/test key
Specification & Documentation
Depth (mm)
52
Length (mm)
87
Option
Single Pole
Size (mm)
87 x 87 x 52
Type
Exit Switch/Button
Width (mm)
87
Supply Voltage (VAC)/VDC
12/24
Material
ABS
- Use in an emergency to open electronic access doors
- May be surface or flush mounted
- Single pole change over contact
- Supplied with 1 reset/test key
Specification & Documentation
Depth (mm)
52
Length (mm)
87
Option
Single Pole
Size (mm)
87 x 87 x 52
Type
Exit Switch/Button
Width (mm)
87
Supply Voltage (VAC)/VDC
12/24
Material
ABS
- Converts a flush mounted exit switch or button to surface mounted
- Easy to install, and means there's no need to channel out the wall
- Suitable for use with the flush mounted exit buttons and switches (check switch size first)
Specification & Documentation
Depth (mm)
40
Length (mm)
88
Option
Stainless Steel Surface Box
Size (mm)
88 x 88 x 40
Type
Exit Switch/Button
Width (mm)
88
Material
Carbon Steel
Documents
- Converts a flush mounted exit switch or button to surface mounted
- Easy to install, and means there's no need to channel out the wall
- Suitable for use with the flush mounted exit buttons and switches (check switch size first)
Specification & Documentation
Depth (mm)
40
Length (mm)
88
Option
Stainless Steel Surface Box
Size (mm)
88 x 88 x 40
Type
Exit Switch/Button
Width (mm)
88
Material
Carbon Steel
Documents
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
2 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
2 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
- For use on interior doors - offices, store rooms
- Light duty
- Off door code change
- Supplied with a 60mm backset latchbolt
- Testing: BS EN 1634-1. For use on 30 minute timber fire doors (Only if installed with intumescent pack. Sold separately)
- Suits 33-55mm thick doors
- 8000 individual codes
- Code length: 4
- Reversible handing
- Holdback function
- No code free function or key override
- All mechanical code locks use non-sequential codes, which means the 4-digit code can be entered in any order - e.g. 1234 can be 4321 or 1342. This is a lower security option than electronic locks but makes them ideal for smaller businesses or premises looking for the convenience and security of access control on a smaller budget
- For Intumescent to suit, search AR195 Intumescent
Specification & Documentation
Backset (mm)
60
Code Change
Off Door
Code Free Function
No
Code Length
4
Door Thickness (mm)
33-55
Finish
Satin Chrome
Hand
Reversible
Hold Back Function
Yes
Individual Codes
8000
Option
Knob
Type
Mechanical Code Lock
Use
Interior
Key Override
No
Material
Solid Brass
Model
AR195
Fire Rating
30
Documents
- For use on interior doors - offices, store rooms
- Light duty
- Off door code change
- Supplied with a 60mm backset latchbolt
- Testing: BS EN 1634-1. For use on 30 minute timber fire doors (Only if installed with intumescent pack. Sold separately)
- Suits 33-55mm thick doors
- 8000 individual codes
- Code length: 4
- Reversible handing
- Holdback function
- No code free function or key override
- All mechanical code locks use non-sequential codes, which means the 4-digit code can be entered in any order - e.g. 1234 can be 4321 or 1342. This is a lower security option than electronic locks but makes them ideal for smaller businesses or premises looking for the convenience and security of access control on a smaller budget
- For Intumescent to suit, search AR195 Intumescent
Specification & Documentation
Backset (mm)
60
Code Change
Off Door
Code Free Function
No
Code Length
4
Door Thickness (mm)
33-55
Finish
Satin Chrome
Hand
Reversible
Hold Back Function
Yes
Individual Codes
8000
Option
Knob
Type
Mechanical Code Lock
Use
Interior
Key Override
No
Material
Solid Brass
Model
AR195
Fire Rating
30
Documents
About this product
- No Touch / Touch Free switch is designed for areas where hygiene is of greatest importance and comes complete with green surface box, but can also be fitted flush
- The switch is supplied with a stainless steel face plate and plastic back box for surface
- installation
- Easy to install and use the switch offers 12 or 24V DC power input with a 3A 230V relay output
- Suitable for medium to high traffic applications
- Delay timer 1-15 seconds
- Dual led indicator light
- Single gang fixings
About this product
- No Touch / Touch Free switch is designed for areas where hygiene is of greatest importance and comes complete with green surface box, but can also be fitted flush
- The switch is supplied with a stainless steel face plate and plastic back box for surface
- installation
- Easy to install and use the switch offers 12 or 24V DC power input with a 3A 230V relay output
- Suitable for medium to high traffic applications
- Delay timer 1-15 seconds
- Dual led indicator light
- Single gang fixings
Specification & Documentation
Depth (mm)
31
Length (mm)
85
Size (mm)
85 x 85 x 31
Supply Voltage (VAC)/VDC
12/24
Type
Exit Switch/Button
Width (mm)
85
Material
304 Stainless Steel
Documents
Reviews
Questions