SKU: 673550
Rothley 1000mm Steel Drilled Angle - Equal Sided - 23.5 x 23.5 x 1.2mm - Galvanised
4.9
(17)
1,419 in stock
Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
Buy in bulk & save up to 5%
About this product
- Galvanised steel flat bar - ideal for use as a weather bar, edge protection, framing, and general construction applications
- Can be used post construction to reinforce the existing structures, support braces, ladder hangers, gate latches, ductwork, overhead doors and heaters
- Can also be used to trim an edge or be rebated to create a ledge or lip
- Manufactured from steel making it durable and corrosion resistant
- Suitable for internal and external use
- Dimensions: 1000 x 23.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.2
Finish
Galvanised Steel
Finish Group
Steel
Material
Galvanised Steel
Type
Flat Bar
Width (mm)
23
Length (mm)
1000
Height (mm)
1.2
Self Adhesive
No
Option
Flat
Size (mm)
1000 x 23 x 1.2 x 1.2
Use
Interior & Exterior
About this product
- Galvanised steel flat bar - ideal for use as a weather bar, edge protection, framing, and general construction applications
- Can be used post construction to reinforce the existing structures, support braces, ladder hangers, gate latches, ductwork, overhead doors and heaters
- Can also be used to trim an edge or be rebated to create a ledge or lip
- Manufactured from steel making it durable and corrosion resistant
- Suitable for internal and external use
- Dimensions: 1000 x 23.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.2
Finish
Galvanised Steel
Finish Group
Steel
Material
Galvanised Steel
Type
Flat Bar
Width (mm)
23
Length (mm)
1000
Height (mm)
1.2
Self Adhesive
No
Option
Flat
Size (mm)
1000 x 23 x 1.2 x 1.2
Use
Interior & Exterior
About this product
- Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
- Suitable for factories, schools, hotels and hospitals that have surfaces that need protection from being struck or worn
- Manufactured from galvanised steel making it light, strong, durable and corrosion resistant
- Also ideal for rails, posts, supported, hangers flanges, brackets, gate and fence structures
- Suitable for internal and external use
- Dimensions: 1000 x 23.5 x 23.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.2
Finish
Galvanised Steel
Finish Group
Steel
Height (mm)
5
Material
Galvanised Steel
Type
Angle
Width (mm)
23.5
Length (mm)
1000
Option
Equal Sided
Self Adhesive
No
Size (mm)
1000 x 23.5 x 5 x 1.2
Use
Interior & Exterior
About this product
- Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
- Suitable for factories, schools, hotels and hospitals that have surfaces that need protection from being struck or worn
- Manufactured from galvanised steel making it light, strong, durable and corrosion resistant
- Also ideal for rails, posts, supported, hangers flanges, brackets, gate and fence structures
- Suitable for internal and external use
- Dimensions: 1000 x 23.5 x 23.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.2
Finish
Galvanised Steel
Finish Group
Steel
Height (mm)
5
Material
Galvanised Steel
Type
Angle
Width (mm)
23.5
Length (mm)
1000
Option
Equal Sided
Self Adhesive
No
Size (mm)
1000 x 23.5 x 5 x 1.2
Use
Interior & Exterior
About this product
- Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
- Suitable for factories, schools, hotels and hospitals that have surfaces that need protection from being struck or worn
- Manufactured from galvanised steel making it light, strong, durable and corrosion resistant
- Also ideal for rails, posts, supported, hangers flanges, brackets, gate and fence structures
- Suitable for internal and external use
- Dimensions: 1000 x 35.5 x 35.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.5
Finish
Galvanised Steel
Finish Group
Steel
Height (mm)
5
Material
Galvanised Steel
Type
Angle
Width (mm)
35.5
Length (mm)
1000
Option
Equal Sided
Self Adhesive
No
Size (mm)
1000 x 35.5 x 5 x 1.5
Use
Interior & Exterior
About this product
- Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
- Suitable for factories, schools, hotels and hospitals that have surfaces that need protection from being struck or worn
- Manufactured from galvanised steel making it light, strong, durable and corrosion resistant
- Also ideal for rails, posts, supported, hangers flanges, brackets, gate and fence structures
- Suitable for internal and external use
- Dimensions: 1000 x 35.5 x 35.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.5
Finish
Galvanised Steel
Finish Group
Steel
Height (mm)
5
Material
Galvanised Steel
Type
Angle
Width (mm)
35.5
Length (mm)
1000
Option
Equal Sided
Self Adhesive
No
Size (mm)
1000 x 35.5 x 5 x 1.5
Use
Interior & Exterior
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Type
Countersunk
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 50
Length (mm)
50
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Fully threaded - only screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Type
Countersunk
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 50
Length (mm)
50
Range
Solo Chippy
Material
Carbon Steel
Documents
- Drylining and flooring screw
- Surface hardened to prevent torque shearing under load
Specification & Documentation
Bit Size
PH2
Collated
Uncollated
Finish
Zinc Plated
Head Type
Phillips
Pack Quantity
1000
Size (mm)
4.2 x 13
Type
Coarse Thread
CE Rated
Yes
Material
Carbon Steel
Option
Sharp Point
- Drylining and flooring screw
- Surface hardened to prevent torque shearing under load
Specification & Documentation
Bit Size
PH2
Collated
Uncollated
Finish
Zinc Plated
Head Type
Phillips
Pack Quantity
1000
Size (mm)
4.2 x 13
Type
Coarse Thread
CE Rated
Yes
Material
Carbon Steel
Option
Sharp Point
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 80
Type
Countersunk
Length (mm)
80
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 80
Type
Countersunk
Length (mm)
80
Range
Solo Chippy
Material
Carbon Steel
Documents
This product is rated 4.9 out of 5 by other customers
Urgent Items Needed - Wasn’t Let Down
Great Service - Good Price and Easy to Use Website
Good product.
Good price, in stock, well-packed. Exactly as per description.
Just what i needed
I was building a new drink shelving system for my garage and needed some type of runner for the cans to fit into. After some searching I found these angle lengths. They were perfect for my project and I also found them easy to cut to length. The ordering process was simple and the goods turned up the following day on time. Brilliant service and it will be my go to site for anything metal in future
About this product
- Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
- Suitable for factories, schools, hotels and hospitals that have surfaces that need protection from being struck or worn
- Manufactured from galvanised steel making it light, strong, durable and corrosion resistant
- Also ideal for rails, posts, supported, hangers flanges, brackets, gate and fence structures
- Suitable for internal and external use
- Dimensions: 1000 x 23.5 x 23.5 x 1.2mm
- Can be cut to size if needed
About this product
- Equal sided L shaped angle with pre-drilled holes, ideal for a range of joinery uses, including worktop edges, corner protection, edge protection, framing, and general construction applications
- Suitable for factories, schools, hotels and hospitals that have surfaces that need protection from being struck or worn
- Manufactured from galvanised steel making it light, strong, durable and corrosion resistant
- Also ideal for rails, posts, supported, hangers flanges, brackets, gate and fence structures
- Suitable for internal and external use
- Dimensions: 1000 x 23.5 x 23.5 x 1.2mm
- Can be cut to size if needed
Specification & Documentation
Depth (mm)
1.2
Finish
Galvanised Steel
Finish Group
Steel
Height (mm)
5
Material
Galvanised Steel
Type
Angle
Width (mm)
23.5
Length (mm)
1000
Option
Equal Sided
Self Adhesive
No
Size (mm)
1000 x 23.5 x 5 x 1.2
Use
Interior & Exterior
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Anonymous - 3 years ago
Urgent Items Needed - Wasn’t Let Down
Great Service - Good Price and Easy to Use Website
Was this review helpful?
Verified customer
SaintBob - 3 years ago
Good product.
Good price, in stock, well-packed. Exactly as per description.
Was this review helpful?
Verified customer
Dean Knight - 4 years ago
Just what i needed
I was building a new drink shelving system for my garage and needed some type of runner for the cans to fit into. After some searching I found these angle lengths. They were perfect for my project and I also found them easy to cut to length. The ordering process was simple and the goods turned up the following day on time. Brilliant service and it will be my go to site for anything metal in future
Was this review helpful?
Verified customer
Mark glazzard - 4 years ago
Job to do
Had a job to carry out Needed to build a guard for a turning wheel and this angle is great to use easy to cut and shape Great service and great value
Was this review helpful?
Verified customer
Anonymous - 4 years ago
Amazingly good value
The item was exactly what I wanted to complete my job. The angle iron was easy to cut to size and the different sized holes made it easy to bolt together. Factor in the reasonable price for a pack of ten and this purchase was amazingly good value.
Was this review helpful?
Verified customer
Page 1 of 2
Questions
chelski - 5 years ago
Category Manager
Hello, From centre to centre, the distance is 52mm. The distance between each gap is 20mm. Hole diameter is roughly 9mm. Thank you
Was this question helpful?
Page 1 of 1
