SKU: 621319
Rawlplug Sleeve Anchor Projecting Bolt - M12 - 145 x 18 x 26mm - Pack of 10
0.0
(0)
4 in stock
Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
Select Size (mm)
Buy in bulk & save up to 5%
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
85
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 145
Type
Sleeve Anchors
Length (mm)
145
Documents
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
85
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 145
Type
Sleeve Anchors
Length (mm)
145
Documents
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
About this product
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
About this product
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Anti-pick, anti-saw & anti-drill features for resistance against attack
- 20mm deadbolt throw with hardened steel pins
- Suitable for doors up to 54mm thick
- High security
- Can be used on left or right handed doors
- Suitable for use on 30 & 60 minute fire doors
- CE marked & tested to BS3621:2007
- NOTE: The appropriate intumescent lock protection should be used to ensure adherence to regulations
- 10 year guarantee
Specification & Documentation
Backset (mm)
57
British Standard
Yes
Case Size (mm)
81
Centres (mm)
57
Certifire
Yes
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Option
5 Lever
Size (mm)
109.6 x 81
Type
Sashlock
CE Rated
Yes
Keyed Alike
No
Profile
Square
Material
Mild Steel
Range
StrongBOLT
Anti Drill
Yes
Anti Pick
Yes
Secured by Design
Yes
UKCA Approved
Yes
- Anti-pick, anti-saw & anti-drill features for resistance against attack
- 20mm deadbolt throw with hardened steel pins
- Suitable for doors up to 54mm thick
- High security
- Can be used on left or right handed doors
- Suitable for use on 30 & 60 minute fire doors
- CE marked & tested to BS3621:2007
- NOTE: The appropriate intumescent lock protection should be used to ensure adherence to regulations
- 10 year guarantee
Specification & Documentation
Backset (mm)
57
British Standard
Yes
Case Size (mm)
81
Centres (mm)
57
Certifire
Yes
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Option
5 Lever
Size (mm)
109.6 x 81
Type
Sashlock
CE Rated
Yes
Keyed Alike
No
Profile
Square
Material
Mild Steel
Range
StrongBOLT
Anti Drill
Yes
Anti Pick
Yes
Secured by Design
Yes
UKCA Approved
Yes
- Simpson StrongTie Part Code: JHA270/91
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
234 x 91 x 0.9
Material
Galvanised Steel
Option
Standard Leg
- Simpson StrongTie Part Code: JHA270/91
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
234 x 91 x 0.9
Material
Galvanised Steel
Option
Standard Leg
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
55
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 110
Type
Sleeve Anchors
Length (mm)
110
Documents
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
55
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 110
Type
Sleeve Anchors
Length (mm)
110
Documents
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
85
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 145
Type
Sleeve Anchors
Length (mm)
145
Documents
Reviews
Questions
