SKU: 183985
Rawlplug Sleeve Anchor Projecting Bolt - M12 - 110 x 18 x 26mm - Pack of 10
5.0
(3)
8 in stock
Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
Select Size (mm)
Buy in bulk & save up to 4%
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
55
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 110
Type
Sleeve Anchors
Length (mm)
110
Documents
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
55
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 110
Type
Sleeve Anchors
Length (mm)
110
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
About this product
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
16
Size (mm)
16 x 210
Type
SDS Plus Hammer Drill Bit
Working Length (m)
150
Application
Masonry
Length (mm)
210
Material
Carbon Steel
Documents
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
16
Size (mm)
16 x 210
Type
SDS Plus Hammer Drill Bit
Working Length (m)
150
Application
Masonry
Length (mm)
210
Material
Carbon Steel
Documents
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
85
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 145
Type
Sleeve Anchors
Length (mm)
145
Documents
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
85
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 145
Type
Sleeve Anchors
Length (mm)
145
Documents
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
About this product
- Torque controlled expansion anchor comprising a split sleeve and a bolt incorporating an expander wedge
- This is a through fixing, eliminating the need for marking out, ensuring fast and simple installation
- Suitable for use in concrete, brickwork, blockwork and stone
Specification & Documentation
Bolt Size (mm)
M12
Drill Diameter (mm)
16
Fixing Thickness (mm)
55
Gauge
M12
Hole Depth (mm)
60
Material
Metal
Pack Quantity
10
Size (mm)
M12 x 110
Type
Sleeve Anchors
Length (mm)
110
Documents
Reviews
Questions
