SKU: 596045
Rawlplug Rawlok Sleeve Anchor Loose Bolt - M10 x 100mm - Pack of 25
3.0
(3)
8 in stock
For use in medium weight applications in brickwork, blockwork and masonry
Select Size (mm)
Buy in bulk & save up to 5%
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports where the post needs to be flush against the wall
- Holds post base above ground level to prevent rot and decay
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
75
Type
Flush Fit Bolt Down
Option
Bolt Secure
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports where the post needs to be flush against the wall
- Holds post base above ground level to prevent rot and decay
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
75
Type
Flush Fit Bolt Down
Option
Bolt Secure
Documents
About this product
- For use in medium weight applications in brickwork, blockwork and masonry
- Through fixing, allows drilling through pre-positioned fixture
- No marking out required
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
12
Fixing Thickness (mm)
44
Gauge
M10
Hole Depth (mm)
55
Material
Metal
Pack Quantity
25
Size (mm)
M10 x 100
Type
Sleeve Anchors
Length (mm)
100
Documents
About this product
- For use in medium weight applications in brickwork, blockwork and masonry
- Through fixing, allows drilling through pre-positioned fixture
- No marking out required
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
12
Fixing Thickness (mm)
44
Gauge
M10
Hole Depth (mm)
55
Material
Metal
Pack Quantity
25
Size (mm)
M10 x 100
Type
Sleeve Anchors
Length (mm)
100
Documents
About this product
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
10
Size (mm)
10 x 210
Type
SDS Plus Hammer Drill Bit
Working Length (m)
150
Application
Masonry
Length (mm)
210
Material
Carbon Steel
About this product
- For use in rotary hammers with the SDS plus tool system
- Fully heat treated to eliminate bending
- Shot blast finish for rust protection
- Suitable for use in concrete block, concrete, stone and brick
Specification & Documentation
Drill Diameter (mm)
10
Size (mm)
10 x 210
Type
SDS Plus Hammer Drill Bit
Working Length (m)
150
Application
Masonry
Length (mm)
210
Material
Carbon Steel
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
- Simpson StrongTie Part Code: JHA270/47
- A galvanised joist hanger featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Holds post base above ground level to prevent rot and decay
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
100
Type
Bolt Down
Option
Bolt Secure
Documents
About this product
- Quick and easy way to erect fencing and posts - no digging required
- Designed to be fitted to an existing hard base
- Ideal for patio fencing, decking, pergolas or car ports
- Bolt secure system clamps the post base firmly into the holder and allows for easy post adjustment or removal at a later stage
- Holds post base above ground level to prevent rot and decay
- Fixing plate bolt hole size: M10
Specification & Documentation
Dual Coated
Yes
Finish
Oxide Red
Material
Carbon Steel
Size (mm)
100
Type
Bolt Down
Option
Bolt Secure
Documents
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
- Square twist nails are ideal for use where very strong joints are required
- Ideal for all types of builders metal work
- Twisted shank gives an enhanced pull-out resistance
- Galvanised finish for medium duty rust protection
- Conforms to Eurocode 5 and service class 2 - for interior and covered exterior applications
- 2.5kg of nails per pack
Specification & Documentation
CE Rated
Yes
Finish
Galvanised
Gauge
3.75mm
Head Type
Round
Length (mm)
30
Pack Size
2.5kg
Size (mm)
3.75 x 30
Type
Exterior Nails
Material
Carbon Steel
Pack Quantity
2.5kg
Documents
About this product
- For use in medium weight applications in brickwork, blockwork and masonry
- Through fixing, allows drilling through pre-positioned fixture
- No marking out required
About this product
- For use in medium weight applications in brickwork, blockwork and masonry
- Through fixing, allows drilling through pre-positioned fixture
- No marking out required
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
12
Fixing Thickness (mm)
44
Gauge
M10
Hole Depth (mm)
55
Material
Metal
Pack Quantity
25
Size (mm)
M10 x 100
Type
Sleeve Anchors
Length (mm)
100
Documents
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
RiMo - 4 years ago
pants
Did not tighten up properly in ground concrete. Then pretty impossible to remove. Disaster, ruined the fence post job I started but could not finish.
Was this review helpful?
Verified customer
Robert Shephard - 4 years ago
Just the job
Bought these for attaching metposts to block work for pergola and trellis fencing. Using recommended drill size bolts were a tight fit which needed to be driven into holes, when tighten down the job is very firmly attached. Would recommend
Was this review helpful?
Verified customer
Page 1 of 1
Questions
