SKU: 820238
Rawlplug Rawlbolt Shield Anchor Projecting Bolt - M10 x 135mm - 60P - Pack of 5
5.0
(2)
8 in stock
A high performance steel expansion anchor, suitable for the most demanding safety critical applications
Select Size (mm)
Buy in bulk & save up to 4%
About this product
- A high performance steel expansion anchor, suitable for the most demanding safety critical applications
- This range offers exceptional tension, shear and combined load performance in concrete
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
16
ETA
Yes
Fixing Thickness (mm)
60
Gauge
M10
Hole Depth (mm)
65
Material
Carbon Steel
Pack Quantity
5
Size (mm)
M10 x 135
Type
Shield Anchors
CE Rated
Yes
Length (mm)
135
Documents
About this product
- A high performance steel expansion anchor, suitable for the most demanding safety critical applications
- This range offers exceptional tension, shear and combined load performance in concrete
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
16
ETA
Yes
Fixing Thickness (mm)
60
Gauge
M10
Hole Depth (mm)
65
Material
Carbon Steel
Pack Quantity
5
Size (mm)
M10 x 135
Type
Shield Anchors
CE Rated
Yes
Length (mm)
135
Documents
About this product
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
About this product
- A galvanised joist hanger (part code JHA270/47) featuring a speed-prong to hold the hanger in position allowing easier attachment - no more holding the hanger, joist and nail in one hand while swinging a hammer with the other!
- Incorporates a location tab allowing easy alignment of the joist hanger to the timber
- Minimum and maximum nailing schedules are stamped into the strap ensuring the correct fitting of the joist hanger
- This joist hanger features a wider strap providing more surface area on the supporting timber and allowing increased nail spacing
- Can be used for face fix or wrap over
- Manufactured from pre-galvanised mild steel
- Holes suited for a 30 x 7.5mm galvanised square twist nail
Specification & Documentation
Finish
Galvanised
Thickness (mm)
0.9
Type
Joist Hanger
CE Rated
Yes
Size (mm)
236.5 x 47 x 0.9
Material
Galvanised Steel
Option
Standard Leg
Pack Quantity
1
Height (mm)
236.5
Width (mm)
47
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
100
Size (mm)
5.0 x 100
CE Rated
Yes
Type
Countersunk
Length (mm)
100
Range
Solo Chippy
Material
Carbon Steel
Documents
- Penny washers are commonly used for spreading the clamping load, reducing a hole diameter & packing out
- They have a large diameter and are also known as a 'mudguard' washer
- Manufactured from A2 stainless steel for superior corrosion resistance - ideal for exterior use
- Stainless steel must be used where there is a corrosive environment or corrosive base material
- Conforms to DIN 9054
Specification & Documentation
Finish
Stainless Steel
Pack Quantity
10
Size (mm)
M10 x 25
Type
Washers
Material
304 Stainless Steel
- Penny washers are commonly used for spreading the clamping load, reducing a hole diameter & packing out
- They have a large diameter and are also known as a 'mudguard' washer
- Manufactured from A2 stainless steel for superior corrosion resistance - ideal for exterior use
- Stainless steel must be used where there is a corrosive environment or corrosive base material
- Conforms to DIN 9054
Specification & Documentation
Finish
Stainless Steel
Pack Quantity
10
Size (mm)
M10 x 25
Type
Washers
Material
304 Stainless Steel
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 80
Type
Countersunk
Length (mm)
80
Range
Solo Chippy
Material
Carbon Steel
Documents
- Pozi countersunk wood screws designed to be consistently reliable in softwood, chipboard, plastic and some hardwoods or into masonry with the use of a plastic plug
- Partially threaded - screws with lengths of 80mm and above are partially threaded to 70mm
- Double countersunk reduces the likelihood of head shear and assists completion of countersinking
- Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
- 40° deep single thread to provide a secure fixing with high pull-out resistance
- 25° sharp point and single lead for a fast start and improved thread acceptance
- CE compliant with the Construction Products Regulations (Eurocode 5 EN1995-1-1)
Specification & Documentation
Bit Size
PZ2
CE Rated
Yes
Finish
Yellow Zinc Passivated
Gauge
5.0mm
Head Type
Pozi
Pack Quantity
200
Size (mm)
5.0 x 80
Type
Countersunk
Length (mm)
80
Range
Solo Chippy
Material
Carbon Steel
Documents
About this product
- A high performance steel expansion anchor, suitable for the most demanding safety critical applications
- This range offers exceptional tension, shear and combined load performance in concrete
About this product
- A high performance steel expansion anchor, suitable for the most demanding safety critical applications
- This range offers exceptional tension, shear and combined load performance in concrete
Specification & Documentation
Bolt Size (mm)
M10
Drill Diameter (mm)
16
ETA
Yes
Fixing Thickness (mm)
60
Gauge
M10
Hole Depth (mm)
65
Material
Carbon Steel
Pack Quantity
5
Size (mm)
M10 x 135
Type
Shield Anchors
CE Rated
Yes
Length (mm)
135
Documents
Reviews
Questions