SKU: 284803
Klug 53mm Heavy Duty Ball Bearing Drawer Runner - Double Extension - 800mm Length - 100kg - Zinc
4.6
(87)
526 in stock
Drawer runner with load capacity of up to 100kg
Buy in bulk & save up to 10%
About this product
- Blum Part Code: 956A1004
- This system will only work with UN-SPRUNG cabinet hinges
- This is a standalone system and can be tapped into a 10mm hole drilled into the edge of the carcass or locked into an adaption plate & screwed to the inside of the carcass
- Lifetime guarantee
Specification & Documentation
Option
Push To Open
Soft Close
Yes
Type
Concealed Kitchen Cabinet Hinge Accessories
MPN
6484096
Range
CLIP top
Pack Quantity
5
Material
Nylon
Documents
About this product
- Blum Part Code: 956A1004
- This system will only work with UN-SPRUNG cabinet hinges
- This is a standalone system and can be tapped into a 10mm hole drilled into the edge of the carcass or locked into an adaption plate & screwed to the inside of the carcass
- Lifetime guarantee
Specification & Documentation
Option
Push To Open
Soft Close
Yes
Type
Concealed Kitchen Cabinet Hinge Accessories
MPN
6484096
Range
CLIP top
Pack Quantity
5
Material
Nylon
Documents
About this product
- Drawer runner with load capacity of up to 100kg
- Suitable for most storage cabinets
- Ideal for use on under-stair pull outs due to the weight that these drawer runners will hold
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Height (mm)
19
Max Weight (kg)
100
Option
Side Mount
Size (mm)
800 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
53
Extension
Double
Length (mm)
800
Material
Mild Steel
About this product
- Drawer runner with load capacity of up to 100kg
- Suitable for most storage cabinets
- Ideal for use on under-stair pull outs due to the weight that these drawer runners will hold
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Height (mm)
19
Max Weight (kg)
100
Option
Side Mount
Size (mm)
800 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
53
Extension
Double
Length (mm)
800
Material
Mild Steel
About this product
- Drawer runner with load capacity of up to 80kg
- Suitable for most storage cabinets
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Finish
Zinc Plated
Height (mm)
53
Max Weight (kg)
80
Option
Side Mount
Size (mm)
800 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
19.2
Extension
Double
Length (mm)
800
Material
Mild Steel
Documents
About this product
- Drawer runner with load capacity of up to 80kg
- Suitable for most storage cabinets
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Finish
Zinc Plated
Height (mm)
53
Max Weight (kg)
80
Option
Side Mount
Size (mm)
800 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
19.2
Extension
Double
Length (mm)
800
Material
Mild Steel
Documents
About this product
- Drawer runner with load capacity of up to 100kg
- Suitable for most storage cabinets
- Ideal for use on under-stair pull outs due to the weight that these drawer runners will hold
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Height (mm)
19
Max Weight (kg)
100
Option
Side Mount
Size (mm)
600 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
53
Extension
Double
Length (mm)
600
Material
Mild Steel
Documents
About this product
- Drawer runner with load capacity of up to 100kg
- Suitable for most storage cabinets
- Ideal for use on under-stair pull outs due to the weight that these drawer runners will hold
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Height (mm)
19
Max Weight (kg)
100
Option
Side Mount
Size (mm)
600 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
53
Extension
Double
Length (mm)
600
Material
Mild Steel
Documents
About this product
- Blum Part Code: 173H7100
- Essential for fixing the Blum cabinet hinges to the cabinet carcass
- Cruciform Plate: standard screw in mounting plate
- Screws not supplied - fix using 3.5mm & 4mm diameter woodscrews
- Light duty
- Lifetime guarantee
Specification & Documentation
Fixing Method
CLIP
Height Adjustment (mm)
/-2
Option
Mounting Plate
Range
CLIP top BLUMOTION
Spacing (mm)
0
Suit Carcass (mm)
18
Type
Concealed Kitchen Cabinet Hinge Accessories
MPN
2364043
Material
Mild Steel
Finish
Pressed Steel
About this product
- Blum Part Code: 173H7100
- Essential for fixing the Blum cabinet hinges to the cabinet carcass
- Cruciform Plate: standard screw in mounting plate
- Screws not supplied - fix using 3.5mm & 4mm diameter woodscrews
- Light duty
- Lifetime guarantee
Specification & Documentation
Fixing Method
CLIP
Height Adjustment (mm)
/-2
Option
Mounting Plate
Range
CLIP top BLUMOTION
Spacing (mm)
0
Suit Carcass (mm)
18
Type
Concealed Kitchen Cabinet Hinge Accessories
MPN
2364043
Material
Mild Steel
Finish
Pressed Steel
About this product
- Drawer runner with load capacity of 45kg
- Strong zinc plated steel
- Side fixed cabinet drawer runner
- 12.5mm fitting gap required per side, therefore 25mm overall gap required
- Double extension allows the drawer to extend fully
- Fixings are not included
Specification & Documentation
Finish
Zinc Plated
Height (mm)
45.5
Max Weight (kg)
45
Option
Side Mount
Size (mm)
700 x 45.5
Type
Drawer Runner
Width (mm)
12.7
Extension
Double
Soft Close
No
Length (mm)
700
Material
Mild Steel
About this product
- Drawer runner with load capacity of 45kg
- Strong zinc plated steel
- Side fixed cabinet drawer runner
- 12.5mm fitting gap required per side, therefore 25mm overall gap required
- Double extension allows the drawer to extend fully
- Fixings are not included
Specification & Documentation
Finish
Zinc Plated
Height (mm)
45.5
Max Weight (kg)
45
Option
Side Mount
Size (mm)
700 x 45.5
Type
Drawer Runner
Width (mm)
12.7
Extension
Double
Soft Close
No
Length (mm)
700
Material
Mild Steel
This product is rated 4.6 out of 5 by other customers
Heavy heavy duty!!!
Bought 3 pairs of these for under stairs pull out drawers. Extremely well built, these runners are definitely up to the job. 100kg rated. Easy to install. Perfect!!
Chonky, may need adjustment with a file.
Heavy duty, reasonably well made runners. I had to file a bit off of one of the runners to make it run a bit smoother but not a major job. These have backstops with plastic / rubber pieces that prevent the drawer slamming into the end stops, and provide a nice feel as the drawer locates into its home position. The backstops can be removed and the folded metal retainer bashed flat with a hammer. This then allows the drawer to go back further than the home position which is useful to a) get a bit more travel out of the runner and b) allow it to be used with a push to open / close mechanism.
Ideal for Deep Understairs Drawers
I bought two sets of these runners to use in an understairs cupboard. They're a lot cheaper than some of the other options but, they seem to be strong enough to hold an 18mm MDF drawer box plus the contents inside. As with this style of runner, it can be a little bit tricky to first connect them together. Do not force it, or you'll start to loose the bearings! Some may not like the fact that these runners will be visible once the drawers are open but, honestly, they're very cost-effective and should last well.
About this product
- Drawer runner with load capacity of up to 100kg
- Suitable for most storage cabinets
- Ideal for use on under-stair pull outs due to the weight that these drawer runners will hold
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
About this product
- Drawer runner with load capacity of up to 100kg
- Suitable for most storage cabinets
- Ideal for use on under-stair pull outs due to the weight that these drawer runners will hold
- Strong material - 2mm thick
- Easy to install
- Fixings are not included
Specification & Documentation
Height (mm)
19
Max Weight (kg)
100
Option
Side Mount
Size (mm)
800 x 53
Soft Close
No
Type
Drawer Runner
Width (mm)
53
Extension
Double
Length (mm)
800
Material
Mild Steel
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Sexylegs - 3 days ago
Heavy heavy duty!!!
Bought 3 pairs of these for under stairs pull out drawers. Extremely well built, these runners are definitely up to the job. 100kg rated. Easy to install. Perfect!!
Was this review helpful?
Verified customer
Uncle Grump - 4 months ago
Chonky, may need adjustment with a file.
Heavy duty, reasonably well made runners. I had to file a bit off of one of the runners to make it run a bit smoother but not a major job. These have backstops with plastic / rubber pieces that prevent the drawer slamming into the end stops, and provide a nice feel as the drawer locates into its home position. The backstops can be removed and the folded metal retainer bashed flat with a hammer. This then allows the drawer to go back further than the home position which is useful to a) get a bit more travel out of the runner and b) allow it to be used with a push to open / close mechanism.
Was this review helpful?
Verified customer
Occasional DIYer - 5 months ago
Happy customer
Communication and delivery was great. The runners were easy to fit and work perfectly.
Was this review helpful?
Verified customer
opjcarpentry - 6 months ago
Ideal for Deep Understairs Drawers
I bought two sets of these runners to use in an understairs cupboard. They're a lot cheaper than some of the other options but, they seem to be strong enough to hold an 18mm MDF drawer box plus the contents inside. As with this style of runner, it can be a little bit tricky to first connect them together. Do not force it, or you'll start to loose the bearings! Some may not like the fact that these runners will be visible once the drawers are open but, honestly, they're very cost-effective and should last well.
Was this review helpful?
Verified customer
KWkw - 6 months ago
Great rails at a good price.
Well priced rails that are easy to fit. Our 5 year old twin granddaughters enjoyed riding the under stairs draws and our son in law remarked on how sturdy the were. We liked the way the rails allow you to pull the draw right out and it remains stable.
Was this review helpful?
Verified customer
Page 1 of 6
Questions
Anonymous - 3 months ago
Category Management
Hi, this drawer runner isn't soft close, the closest alternative we have is https://www.ironmongerydirect.co.uk/product/klug-53mm-ball-bearing-soft-close-drawer-runner-double-extension-800mm-length-80kg-zinc-167433 Thank you.
Was this question helpful?
Anonymous - 10 months ago
Category Management
Hi, It would be better to use countersunk fixings depending on the application. The length of the fixings would depend on the thickness of the material the runners are being attached to. Take care!
Was this question helpful?
Anonymous - 4 years ago
Category Manager
Hello, We a re currently waiting for an updated product drawing from our supplier, but this may take a week or so. I do have the information below for the 80kg runners: https://ironmongerydirect-assets.s3.amazonaws.com/product-documentation/technical/265757.pdf These do detach so you can remove the drawer Thank you
Was this question helpful?
Page 1 of 3