SKU: 122810
FrameFit High Expansion Fire Seal - FD30 - 1.5 x 44 x 5200mm - White
0.0
(0)
38 in stock
A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door
£103.52each+ VAT
VAT
Free returns within 28 days
Frequently bought together
Current item
Main Product
£103.52
Each + VAT
View bulk savings
1-9
£103.52
10+
£103.52
20+
£103.52
Added
Details
Product code: 122810
£103.52
Each + VAT
View bulk savings
1-9
£103.52
10+
£103.52
20+
£103.52
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door
- The high expansion seal must be used in conjunction with a low modulous seal if there is no intumescent strip present in the door
- If there is an intumescent strip present in the frame, this must be removed to allow FrameFit seals to fit flush with the frame and should be replaced with both low modulous seals as well as a high expansion seal
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Supplied with pins and alcohol wipes to secure the seal to the frame as well as identification label and data pin
- Note: High expansion seal is not for use on the bottom of the door - the low modulous seal and the fire seal carrier should be used instead
- Tested to remediate gaps up to 15mm around the door when used with a low modulous seal
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 1.5
Type
FrameFit Seal
Material
Polyvinyl Chloride
Update
Details
Previous Product
Next Product
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door
- The high expansion seal must be used in conjunction with a low modulous seal if there is no intumescent strip present in the door
- If there is an intumescent strip present in the frame, this must be removed to allow FrameFit seals to fit flush with the frame and should be replaced with both low modulous seals as well as a high expansion seal
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Supplied with pins and alcohol wipes to secure the seal to the frame as well as identification label and data pin
- Note: High expansion seal is not for use on the bottom of the door - the low modulous seal and the fire seal carrier should be used instead
- Tested to remediate gaps up to 15mm around the door when used with a low modulous seal
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 1.5
Type
FrameFit Seal
Material
Polyvinyl Chloride
Additional products
£148.32
Each + VAT
View bulk savings
1-9
£148.32
10+
£148.32
20+
£148.32
Added
Details
Product code: 332439
£148.32
Each + VAT
View bulk savings
1-9
£148.32
10+
£148.32
20+
£148.32
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door.
- Low modulus spacer profiles for correction of gaps around the perimeter of a fire door
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Can be used with other low modulous seals to ensure the correct gap is covered
- Supplied with pins and alcohol wipes to secure the seal to the frame or door as well as identification label and data pin
- Used for the bottom of the door with a fire seal carrier (sold separately) or for the sides and top of the door frame to remediate the gap
- Tested to remediate gaps up to 15mm around the door and 25mm at the door base
Specification & Documentation
Application
Gap Filler
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 3
Type
FrameFit Seal
Material
Polyvinyl Chloride
Update
Details
Previous Product
Next Product
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door.
- Low modulus spacer profiles for correction of gaps around the perimeter of a fire door
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Can be used with other low modulous seals to ensure the correct gap is covered
- Supplied with pins and alcohol wipes to secure the seal to the frame or door as well as identification label and data pin
- Used for the bottom of the door with a fire seal carrier (sold separately) or for the sides and top of the door frame to remediate the gap
- Tested to remediate gaps up to 15mm around the door and 25mm at the door base
Specification & Documentation
Application
Gap Filler
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 3
Type
FrameFit Seal
Material
Polyvinyl Chloride
£18.00
Each + VAT
View bulk savings
1-9
£18.00
10+
£18.00
20+
£18.00
Added
Details
Product code: 187552
£18.00
Each + VAT
View bulk savings
1-9
£18.00
10+
£18.00
20+
£18.00
About this product
- 30 minute fire rated intumescent strip
- Fully tested to BS 476 Pt 20:22 and Pt 31.1 cold smoke leakage
- Independently tested on a range of single and double leaf doorsets
- Ideal for humid environments
- High tack self-adhesive backing for quick and easy fitting
- All brushes are black with no plastic fin, reducing noise levels and resistance
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Pack Quantity
10
Size (mm)
10 x 4
Type
Brushes
Length (mm)
2100
Material
Polyvinyl Chloride
Update
Details
Previous Product
Next Product
About this product
- 30 minute fire rated intumescent strip
- Fully tested to BS 476 Pt 20:22 and Pt 31.1 cold smoke leakage
- Independently tested on a range of single and double leaf doorsets
- Ideal for humid environments
- High tack self-adhesive backing for quick and easy fitting
- All brushes are black with no plastic fin, reducing noise levels and resistance
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Pack Quantity
10
Size (mm)
10 x 4
Type
Brushes
Length (mm)
2100
Material
Polyvinyl Chloride
£4.50
Each + VAT
View bulk savings
1-9
£4.50
10+
£4.50
20+
£4.50
Add
Details
Product code: 793130
£4.50
Each + VAT
View bulk savings
1-9
£4.50
10+
£4.50
20+
£4.50
About this product
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Butt Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
Option
Ball Bearing
Add
Previous Product
Next Product
About this product
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Butt Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
Option
Ball Bearing
£14.50
Each + VAT
Buy in bulk & save up to 4%
10+
£13.78
Save 4%
Add
Details
Product code: 865699
£14.50
Each + VAT
Buy in bulk & save up to 4%
10+
£13.78
Save 4%
About this product
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Intumescent Hinge Pads
Material
Graphite
Add
Previous Product
Next Product
About this product
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Intumescent Hinge Pads
Material
Graphite
£77.50
Each + VAT
View bulk savings
1-9
£77.50
10+
£77.50
20+
£77.50
Add
Details
Product code: 775534
£77.50
Each + VAT
View bulk savings
1-9
£77.50
10+
£77.50
20+
£77.50
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door.
- Low modulus spacer profiles for correction of gaps around the perimeter of a fire door
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Can be used with other low modulous seals to ensure the correct gap is covered
- Supplied with pins and alcohol wipes to secure the seal to the frame or door as well as identification label and data pin
- Used for the bottom of the door with a fire seal carrier (sold separately) or for the sides and top of the door frame to remediate the gap
- Tested to remediate gaps up to 15mm around the door and 25mm at the door base
Specification & Documentation
Application
Gap Filler
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 1.5
Type
FrameFit Seal
Material
Polyvinyl Chloride
Add
Previous Product
Next Product
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door.
- Low modulus spacer profiles for correction of gaps around the perimeter of a fire door
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Can be used with other low modulous seals to ensure the correct gap is covered
- Supplied with pins and alcohol wipes to secure the seal to the frame or door as well as identification label and data pin
- Used for the bottom of the door with a fire seal carrier (sold separately) or for the sides and top of the door frame to remediate the gap
- Tested to remediate gaps up to 15mm around the door and 25mm at the door base
Specification & Documentation
Application
Gap Filler
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 1.5
Type
FrameFit Seal
Material
Polyvinyl Chloride
Price Summary
Main Product Price
£103.52
Add-on(s) Selected 2
£166.32
£18.00 (1)
Edit
ADD PRODUCT
Total price
£269.84
+ VAT
Items you've added
3
(Excludes items already in bag)
Add 3 Item(s) to Your Basket
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door
- The high expansion seal must be used in conjunction with a low modulous seal if there is no intumescent strip present in the door
- If there is an intumescent strip present in the frame, this must be removed to allow FrameFit seals to fit flush with the frame and should be replaced with both low modulous seals as well as a high expansion seal
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Supplied with pins and alcohol wipes to secure the seal to the frame as well as identification label and data pin
- Note: High expansion seal is not for use on the bottom of the door - the low modulous seal and the fire seal carrier should be used instead
- Tested to remediate gaps up to 15mm around the door when used with a low modulous seal
About this product
- A fully tested and cost effective solution to bring a non-compliant firedoor into compliance. FrameFit ensures you do not have to replace the whole door
- The high expansion seal must be used in conjunction with a low modulous seal if there is no intumescent strip present in the door
- If there is an intumescent strip present in the frame, this must be removed to allow FrameFit seals to fit flush with the frame and should be replaced with both low modulous seals as well as a high expansion seal
- Tested in accordance with BS 1634- 1 and BS 476 Part 22
- Fire retardant up to 30 minutes
- Supplied with pins and alcohol wipes to secure the seal to the frame as well as identification label and data pin
- Note: High expansion seal is not for use on the bottom of the door - the low modulous seal and the fire seal carrier should be used instead
- Tested to remediate gaps up to 15mm around the door when used with a low modulous seal
Specification & Documentation
Application
Fire & Smoke
Certifire
Yes
Colour
White
Fire Rating
30
Length (mm)
5200
Size (mm)
44 x 1.5
Type
FrameFit Seal
Material
Polyvinyl Chloride
Reviews
Questions
No Questions
Free returns within 28 days