Flush Cabinet Hinge - 75 x 51 x 1mm - Zinc Plated - Pack of 10 Pairs

Quality product

Used on MDF end grain and the supplied screws seem to hold fine in pilot holes.

Hinges for light weight door

Purchased these hinges for hanging 6 lightweight internal doors (12 Kg) as didn't want to recess a conventional hinge into the door / frame. They done the job perfectly applying 3 hinges per door. Screws however where very poor quality. The heads broke off on 3 out of the first 6 i screwed in so ended up using my own. The screws where to small for the job anyway so probably would have used my own even if the quality had been higher. Would recommend but ensure you have some replacement screws.

Nearly perfect

On the advice of Charlie DIYte (youtube DIY chap) I got these hinges as the countersink was said to be perfect for hiding screw heads - the door should close fully as the screw heads (six of them) do not contact the wood on either the frame of the cupboard door. This is not the case. As the countersink is not quite deep enough you have to ream/countersink the hinge a bit more to fully get a flush screw fit (or rebate the hinge (defeats the object of a flush hinge. Also screws are poor quality as started before - but not an issue as I used other longer Reisser cutter ones - far better.

Perfect

Good hinges, works well on internal light weight doors

Just right

Excellent hinges for the price. Well made easy to fit