Button Fix Type 2 - Fix Only - 25 x 50mm - Pack of 12

Clever device

The basic principle is clever and it fixes the panel firmly. As can be seen from video instructions, however, it can take some force to pull the panel off once fixed. I had an u usual problem in that I was fixing a plaster board panel which had been tiled. I used to tricks to overcome the risk of the screws pulling out: I drilled pilot holes and injected them with waterproof PVA glue to stabilise the plaster and then screwed in Euro screws while the PVA was still soft and waited 24hrs for glue to set hard. Before attaching with screws, I shaved a tiny bit of of plastic off the retaining points of the clips so that less force was needed to pull them off the button. Another issue was that I needed to use a piece of tape to temporarily fix the clip while using the red screw hole marker device, as otherwise it rotated down and didn’t mark the inside of the panel. That said , I have now successfully attached the panel and pulled it off without problems.