SKU: 321154
Bond It B1 Fire Resistant Expanding Foam - Gun Grade - 750ml
5.0
(2)
358 in stock
Resistant to temperatures over 100°C
£9.05
Buy in bulk & save up to 5%
Delivery of this product is unavailable to any offshore location.
About this product
- Cleaning aerosol to be used with Soudafoam gun and Soudal foams
- Attaches to foam guns for cleaning through foam
- Can also be used to clean away uncured PU foam
Specification & Documentation
About this product
- Cleaning aerosol to be used with Soudafoam gun and Soudal foams
- Attaches to foam guns for cleaning through foam
- Can also be used to clean away uncured PU foam
Specification & Documentation
About this product
- Resistant to temperatures over 100°C
- Ideal for filling and sealing irregular gaps
- Excellent noise and heat insulation
- 4 hour fire integrity
Specification & Documentation
Fire Rating
240
Type
Gun Grade
Use
Interior & Exterior
Volume (ml)
750
About this product
- Resistant to temperatures over 100°C
- Ideal for filling and sealing irregular gaps
- Excellent noise and heat insulation
- 4 hour fire integrity
Specification & Documentation
Fire Rating
240
Type
Gun Grade
Use
Interior & Exterior
Volume (ml)
750
About this product
- Exceptionally hard wearing
- Teflon coated - nothing sticks to this!
Specification & Documentation
Type
Foam Guns
Documents
About this product
- Exceptionally hard wearing
- Teflon coated - nothing sticks to this!
Specification & Documentation
Type
Foam Guns
Documents
About this product
- Intumescent acrylic sealant that provides excellent sound reduction properties coupled with a 4 hour fire barrier
- Remains permanently flexible & can be installed in joints up to 50mm due to excellent no-slump resistance
- Can be overpainted
- Sufficient to produce approx 1 metre using a 20mm x 15mm bead
- Up to 4 hours fire rating dependant on construction
- Install in accordance with test certificate
Specification & Documentation
About this product
- Intumescent acrylic sealant that provides excellent sound reduction properties coupled with a 4 hour fire barrier
- Remains permanently flexible & can be installed in joints up to 50mm due to excellent no-slump resistance
- Can be overpainted
- Sufficient to produce approx 1 metre using a 20mm x 15mm bead
- Up to 4 hours fire rating dependant on construction
- Install in accordance with test certificate
Specification & Documentation
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Hinge Pads
Material
Graphite
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Hinge Pads
Material
Graphite
About this product
- Reliable tool for professionals enabling multiple applications of polyurethane foam
- Solid construction
- Easy application with adjustable foam flow
- Gun cleaner sold separately for easy maintenance - search gun cleaner
Specification & Documentation
Type
Foam Guns
Documents
About this product
- Reliable tool for professionals enabling multiple applications of polyurethane foam
- Solid construction
- Easy application with adjustable foam flow
- Gun cleaner sold separately for easy maintenance - search gun cleaner
Specification & Documentation
Type
Foam Guns
Documents
About this product
- Resistant to temperatures over 100°C
- Ideal for filling and sealing irregular gaps
- Excellent noise and heat insulation
- 4 hour fire integrity
About this product
- Resistant to temperatures over 100°C
- Ideal for filling and sealing irregular gaps
- Excellent noise and heat insulation
- 4 hour fire integrity
Specification & Documentation
Fire Rating
240
Type
Gun Grade
Use
Interior & Exterior
Volume (ml)
750
Reviews
Questions
Anna C - 4 years ago
Category Manager
Hello, The supplier does not advise it has an adhesive, more information is available below: https://ironmongerydirect-assets.s3.amazonaws.com/product-documentation/technical/321154_2.pdf Thank you
Was this question helpful?
Page 1 of 1