SKU: 114436
Arrone AR195/AR295 Series Tubular Latch Intumescent Pack
0.0
(0)
32 in stock
3 piece intumescent kit designed to be used with Arrone AR195 and AR295 code operated locks
About this product
- 3 piece intumescent kit designed to be used with Arrone AR195 and AR295 code operated locks
- Intumescent wraps around the tubular latch, forend and strike plate
- Fire tested to BS EN 1634-1
- Suitable for 30 minute fire door applications
- Material: mono ammonium phosphate
Specification & Documentation
Fire Rating
30
Material
Mono Ammonium Phosphate
Type
Intumescent Lock Packs
Option
AR195/AR295 - Tubular Latch
Pack Quantity
1
Documents
About this product
- 3 piece intumescent kit designed to be used with Arrone AR195 and AR295 code operated locks
- Intumescent wraps around the tubular latch, forend and strike plate
- Fire tested to BS EN 1634-1
- Suitable for 30 minute fire door applications
- Material: mono ammonium phosphate
Specification & Documentation
Fire Rating
30
Material
Mono Ammonium Phosphate
Type
Intumescent Lock Packs
Option
AR195/AR295 - Tubular Latch
Pack Quantity
1
Documents
About this product
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Intumescent Hinge Pads
Material
Graphite
About this product
- Are you fitting to fire doors? We would strongly recommend that you bed both hinge leafs on these intumescent liners to fully comply with BS EN 1634 test requirements
- Suitable for hinges up to 100mm width
- Pack suits 3 pairs of FD60 hinges or 6 pairs hinges on FD30
- Are you fitting fire doors? If yes, you need to fit these pads to comply with European standards
- IMPORTANT LEGAL INFORMATION: It is a legal requirement for hardware fitted to fire resisting doors to be CE marked. This ensures, in the case of any legal claim, that the best quality hardware has been fitted. The hinges we have marked on this page as suitable for fire doors are all tested and accredited. Important: When the hinges shown as being CE Marked are included in a fire resisting test they are fitted to the door and frame with intumescent pads under each leaf. You should fit these intumescent pads under any CE marked hinges to comply with the marking requirements. Failure to comply and fit intumescent pads in these circumstances will negate the installation. Fitting: fit one pad under each hinge leaf for FD30 and two under each leaf for FD60. Certifire is a Third Party Certification scheme encompassing compliance with British or European Standards, Fire test performance and Quality Assurance to ensure that the product certificated provides an acceptably high quality of performance.
Specification & Documentation
Fire Rating
60
Option
30mm
Pack Quantity
24
Size (mm)
100 x 30
Type
Intumescent Hinge Pads
Material
Graphite
About this product
- Screen printed for durability
- Complete with countersunk screw holes and supplied with screws
Specification & Documentation
Diameter (mm)
75
Finish
Satin Stainless Steel
Material
201 Stainless Steel
Pack Size
1
Size (mm)
75 x 1
Thickness (mm)
1
Option
Standard
Type
Fire Door Keep Shut
Pack Quantity
1
About this product
- Screen printed for durability
- Complete with countersunk screw holes and supplied with screws
Specification & Documentation
Diameter (mm)
75
Finish
Satin Stainless Steel
Material
201 Stainless Steel
Pack Size
1
Size (mm)
75 x 1
Thickness (mm)
1
Option
Standard
Type
Fire Door Keep Shut
Pack Quantity
1
- For use on interior doors - offices, store rooms
- Light duty
- Off door code change
- Supplied with a 60mm backset latchbolt
- Testing: BS EN 1634-1. For use on 30 minute timber fire doors (Only if installed with intumescent pack. Sold separately)
- Suits 33-55mm thick doors
- 8000 individual codes
- Code length: 4
- Reversible handing
- Holdback function
- No code free function or key override
- All mechanical code locks use non-sequential codes, which means the 4-digit code can be entered in any order - e.g. 1234 can be 4321 or 1342. This is a lower security option than electronic locks but makes them ideal for smaller businesses or premises looking for the convenience and security of access control on a smaller budget
- For Intumescent to suit, search AR195 Intumescent
Specification & Documentation
Backset (mm)
60
Code Change
Off Door
Code Free Function
No
Code Length
4
Door Thickness (mm)
33-55
Finish
Satin Chrome
Hand
Reversible
Hold Back Function
Yes
Individual Codes
8000
Option
Knob
Type
Mechanical Code Lock
Use
Interior
Key Override
No
Material
Solid Brass
Model
AR195
Fire Rating
No
Pack Quantity
1
Documents
- For use on interior doors - offices, store rooms
- Light duty
- Off door code change
- Supplied with a 60mm backset latchbolt
- Testing: BS EN 1634-1. For use on 30 minute timber fire doors (Only if installed with intumescent pack. Sold separately)
- Suits 33-55mm thick doors
- 8000 individual codes
- Code length: 4
- Reversible handing
- Holdback function
- No code free function or key override
- All mechanical code locks use non-sequential codes, which means the 4-digit code can be entered in any order - e.g. 1234 can be 4321 or 1342. This is a lower security option than electronic locks but makes them ideal for smaller businesses or premises looking for the convenience and security of access control on a smaller budget
- For Intumescent to suit, search AR195 Intumescent
Specification & Documentation
Backset (mm)
60
Code Change
Off Door
Code Free Function
No
Code Length
4
Door Thickness (mm)
33-55
Finish
Satin Chrome
Hand
Reversible
Hold Back Function
Yes
Individual Codes
8000
Option
Knob
Type
Mechanical Code Lock
Use
Interior
Key Override
No
Material
Solid Brass
Model
AR195
Fire Rating
No
Pack Quantity
1
Documents
About this product
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Butt Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
Option
Ball Bearing
Length (mm)
100
About this product
- Fire door hinge suitable for fire doors up to 120kg
- Sold in packs of 3
- BS EN Grade 13
- Grade 201 Stainless Steel
- For interior use
- CE Marked
- Note: Intumescent pads should be used to ensure adherence to fire regulations
- Intumescent hinge pads are available in 100 x 30 and 100 x 43: search for 'intumescent hinge pads for FD30 and FD60' All of our hinge pads can be cut to size
Specification & Documentation
BSEN Grade
13
British Standard
Yes
CE Rated
Yes
Corners
Square
Duty
Heavy
Finish
Satin Stainless Steel
Finish Group
Stainless Steel
Fire Rating
60
Max Door Weight (kg)
120
Size Range (mm)
4 Inch/100mm
Size (mm)
100 x 75 x 3
Steel Rating
201
Type
Butt Hinge
Use
Interior
Pack Quantity
3
Material
201 Stainless Steel
Option
Ball Bearing
Length (mm)
100
About this product
- This complete fire door kit offers the ideal solution for commercial properties, as it includes all the components you need for medium duty interior fire doors. This makes it a cost effective choice for projects on a budget, as everything you need is included in the pack. Pack includes:
- 300 x 19mm bolt fix pull handle with 375 x 73 x 3mm finger plate
- 3 x Grade 13 fire door hinges (100 x 75 x 3mm) with intumescent hinge pads. Hinges are Grade 304 stainless steel, BS EN 1935:2002 Grade 13
- Power size 2-4 fire rated door closer with backcheck and delayed action
- 2 x 75mm satin anodised aluminium Fire Door Keep Shut signs
- 15mm fire and smoke intumescent pack with 2 x 2.1m strips
Specification & Documentation
Arm Finish
Silver
Backcheck
Yes
CE Rated
Yes
Cam Action
No
Certifire
Yes
Cover Finish
Silver
Delayed Action
Yes
Duty
Medium
Equality Act Compliant
Yes
Finish
Aluminium Handle
Fire Rating
120
Max Door Weight (kg)
80
Max Door Width (mm)
1100
Option
Without Dorgard Holder
Power Size
EN 2-4
Track Arm
No
Type
Pull Handle Kit
Hold Open Function
Non Hold Open
Handle Type
Pull Handle
Material
N/A
About this product
- This complete fire door kit offers the ideal solution for commercial properties, as it includes all the components you need for medium duty interior fire doors. This makes it a cost effective choice for projects on a budget, as everything you need is included in the pack. Pack includes:
- 300 x 19mm bolt fix pull handle with 375 x 73 x 3mm finger plate
- 3 x Grade 13 fire door hinges (100 x 75 x 3mm) with intumescent hinge pads. Hinges are Grade 304 stainless steel, BS EN 1935:2002 Grade 13
- Power size 2-4 fire rated door closer with backcheck and delayed action
- 2 x 75mm satin anodised aluminium Fire Door Keep Shut signs
- 15mm fire and smoke intumescent pack with 2 x 2.1m strips
Specification & Documentation
Arm Finish
Silver
Backcheck
Yes
CE Rated
Yes
Cam Action
No
Certifire
Yes
Cover Finish
Silver
Delayed Action
Yes
Duty
Medium
Equality Act Compliant
Yes
Finish
Aluminium Handle
Fire Rating
120
Max Door Weight (kg)
80
Max Door Width (mm)
1100
Option
Without Dorgard Holder
Power Size
EN 2-4
Track Arm
No
Type
Pull Handle Kit
Hold Open Function
Non Hold Open
Handle Type
Pull Handle
Material
N/A
About this product
- 3 piece intumescent kit designed to be used with Arrone AR195 and AR295 code operated locks
- Intumescent wraps around the tubular latch, forend and strike plate
- Fire tested to BS EN 1634-1
- Suitable for 30 minute fire door applications
- Material: mono ammonium phosphate
About this product
- 3 piece intumescent kit designed to be used with Arrone AR195 and AR295 code operated locks
- Intumescent wraps around the tubular latch, forend and strike plate
- Fire tested to BS EN 1634-1
- Suitable for 30 minute fire door applications
- Material: mono ammonium phosphate
Specification & Documentation
Fire Rating
30
Material
Mono Ammonium Phosphate
Type
Intumescent Lock Packs
Option
AR195/AR295 - Tubular Latch
Pack Quantity
1
Documents
Reviews
Questions