SKU: 379995
7.0 AmpH 12v DC Rechargeable Battery for Power Supply Units
0.0
(0)
10 in stock
Rechargeable battery for use with 12v and 24v DC power supply units
Buy in bulk & save up to 4%
- Rechargeable battery for use with 12v and 24v DC power supply units
- Can be used to power access control systems in the event of a power failure
- Low self-discharge rate means the batteries can be stored for up to one year at normal ambient temperatures, with no loss of capacity
Specification & Documentation
Option
7.0 AmpHour
Supply Voltage (VDC)
12
Type
Power Supply
- Rechargeable battery for use with 12v and 24v DC power supply units
- Can be used to power access control systems in the event of a power failure
- Low self-discharge rate means the batteries can be stored for up to one year at normal ambient temperatures, with no loss of capacity
Specification & Documentation
Option
7.0 AmpHour
Supply Voltage (VDC)
12
Type
Power Supply
- Self contained access control system that is ideal for securing single aluminium or timber doors
- Easy to install - suitable for low risk entrance doors
- Kit includes: 12v DC power supply 1.5A, 12v DC APX14 Keypad with steel buttons and chrome housing (IP68 rated), slimline electromagnet (unmonitored) with 250kg holding force, "Press to Exit" button, resettable emergency call point
- Keypad supports 4-digit pin operation
- For inward opening doors use a Z & L bracket code 350856 and for narrow frame outward opening doors use a slimline bracket code 714523
Specification & Documentation
Holding Force (kg)
250
Option
Securefast Standalone Access Control Kit c/w Keypad and Electro Magnetic Lock
Supply Voltage (VDC)
12
Type
Door Entry Kit
Material
Carbon Steel
- Self contained access control system that is ideal for securing single aluminium or timber doors
- Easy to install - suitable for low risk entrance doors
- Kit includes: 12v DC power supply 1.5A, 12v DC APX14 Keypad with steel buttons and chrome housing (IP68 rated), slimline electromagnet (unmonitored) with 250kg holding force, "Press to Exit" button, resettable emergency call point
- Keypad supports 4-digit pin operation
- For inward opening doors use a Z & L bracket code 350856 and for narrow frame outward opening doors use a slimline bracket code 714523
Specification & Documentation
Holding Force (kg)
250
Option
Securefast Standalone Access Control Kit c/w Keypad and Electro Magnetic Lock
Supply Voltage (VDC)
12
Type
Door Entry Kit
Material
Carbon Steel
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
1 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
1 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
2 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
2 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
About this product
- Use in an emergency to open electronic access doors
- May be surface or flush mounted
- Single pole change over contact
- Supplied with 1 reset/test key
Specification & Documentation
Depth (mm)
52
Length (mm)
87
Option
Single Pole
Size (mm)
87 x 87 x 52
Type
Exit Switch/Button
Width (mm)
87
Supply Voltage (VAC)/VDC
12/24
Material
ABS
About this product
- Use in an emergency to open electronic access doors
- May be surface or flush mounted
- Single pole change over contact
- Supplied with 1 reset/test key
Specification & Documentation
Depth (mm)
52
Length (mm)
87
Option
Single Pole
Size (mm)
87 x 87 x 52
Type
Exit Switch/Button
Width (mm)
87
Supply Voltage (VAC)/VDC
12/24
Material
ABS
About this product
- Press to Exit switch for use with door entry systems
- Ideal for medium to high traffic areas such as offices and schools
- Suitable for surface mounting
- CE compliant
- RoHS approved
- 304 Stainless Steel plate with 22mm diameter button
- Tested to 500,000 operations
- Switch rated 3A at 12/24 V DC
- Output - NO/NC/COM
- Surface mounted green backbox
- Size: 88 x 88 x 31mm
Specification & Documentation
Depth (mm)
31
Length (mm)
88
Option
Single Gang
Size (mm)
88 x 88 x 31
Type
Exit Switch/Button
Width (mm)
88
Supply Voltage (VAC)/VDC
12/24
Material
304 Stainless Steel
Documents
About this product
- Press to Exit switch for use with door entry systems
- Ideal for medium to high traffic areas such as offices and schools
- Suitable for surface mounting
- CE compliant
- RoHS approved
- 304 Stainless Steel plate with 22mm diameter button
- Tested to 500,000 operations
- Switch rated 3A at 12/24 V DC
- Output - NO/NC/COM
- Surface mounted green backbox
- Size: 88 x 88 x 31mm
Specification & Documentation
Depth (mm)
31
Length (mm)
88
Option
Single Gang
Size (mm)
88 x 88 x 31
Type
Exit Switch/Button
Width (mm)
88
Supply Voltage (VAC)/VDC
12/24
Material
304 Stainless Steel
Documents
About this product
- Rechargeable battery for use with 12v and 24v DC power supply units
- Can be used to power access control systems in the event of a power failure
- Low self-discharge rate means the batteries can be stored for up to one year at normal ambient temperatures, with no loss of capacity
About this product
- Rechargeable battery for use with 12v and 24v DC power supply units
- Can be used to power access control systems in the event of a power failure
- Low self-discharge rate means the batteries can be stored for up to one year at normal ambient temperatures, with no loss of capacity
Specification & Documentation
Option
7.0 AmpHour
Supply Voltage (VDC)
12
Type
Power Supply
Material
ABS
Reviews
Questions
Brad King - 5 years ago
Category Manager
Hello Length: 151mm Width: 65mm Height: 94mm Total height: 100mm Weight: 2.2lg Terminal connector: 4.8mm Thank you
Was this question helpful?
Page 1 of 1
