SKU: 512528
12v DC Regulated Boxed Door Entry Power Supply Unit - 1 Amp
5.0
(4)
1 in stock
Boxed power supply unit that's ideal for use with access control or alarm systems
Buy in bulk & save up to 5%
- Designed for surface rim locks in access control systems
- Suitable for timber doors in low to medium traffic areas
- 3900N holding force
- 12v DC
- Fail safe (Un-locked)
- For compatible power supply use code 512528
- Supplied with mortice plate
Specification & Documentation
Depth (mm)
25
Length (mm)
106
Option
Fail Unlocked 12V DC
Size (mm)
106 x 50 x 25
Supply Voltage (VDC)
12
Type
Electric Strike Releases
Width (mm)
50
Material
Zinc
Pack Quantity
1
- Designed for surface rim locks in access control systems
- Suitable for timber doors in low to medium traffic areas
- 3900N holding force
- 12v DC
- Fail safe (Un-locked)
- For compatible power supply use code 512528
- Supplied with mortice plate
Specification & Documentation
Depth (mm)
25
Length (mm)
106
Option
Fail Unlocked 12V DC
Size (mm)
106 x 50 x 25
Supply Voltage (VDC)
12
Type
Electric Strike Releases
Width (mm)
50
Material
Zinc
Pack Quantity
1
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
1 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
Pack Quantity
1
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
1 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
Pack Quantity
1
About this product
- Use in an emergency to open electronic access doors
- May be surface or flush mounted
- Single pole change over contact
- Supplied with 1 reset/test key
Specification & Documentation
Depth (mm)
52
Length (mm)
87
Option
Single Pole
Size (mm)
87 x 87 x 52
Type
Exit Switch/Button
Width (mm)
87
Supply Voltage (VAC)/VDC
12/24
Material
ABS
Pack Quantity
1
About this product
- Use in an emergency to open electronic access doors
- May be surface or flush mounted
- Single pole change over contact
- Supplied with 1 reset/test key
Specification & Documentation
Depth (mm)
52
Length (mm)
87
Option
Single Pole
Size (mm)
87 x 87 x 52
Type
Exit Switch/Button
Width (mm)
87
Supply Voltage (VAC)/VDC
12/24
Material
ABS
Pack Quantity
1
About this product
- Keypad that can be used to link to any access control system
- Has the option of two 4 digit user codes - one code can be used for employees and the other for maintenance workers, for easier access tracking
- Cast zinc housing with stainless steel buttons
- Ideal for offices
- Internal or external applications under shelter
- Easy code change using pin and pegs
- 12-24v AC/DC operating voltage
- Single volt relay (Pulse)
- Backlit buttons
- Previously Bewator Siemens K42
Specification & Documentation
Depth (mm)
80
Length (mm)
140
Option
Bewator K42 Keypad
Size (mm)
140 x 40 x 80
Supply Voltage (VDC)
12/24
Type
Keypad
Width (mm)
40
Material
Aluminium
Pack Quantity
1
About this product
- Keypad that can be used to link to any access control system
- Has the option of two 4 digit user codes - one code can be used for employees and the other for maintenance workers, for easier access tracking
- Cast zinc housing with stainless steel buttons
- Ideal for offices
- Internal or external applications under shelter
- Easy code change using pin and pegs
- 12-24v AC/DC operating voltage
- Single volt relay (Pulse)
- Backlit buttons
- Previously Bewator Siemens K42
Specification & Documentation
Depth (mm)
80
Length (mm)
140
Option
Bewator K42 Keypad
Size (mm)
140 x 40 x 80
Supply Voltage (VDC)
12/24
Type
Keypad
Width (mm)
40
Material
Aluminium
Pack Quantity
1
About this product
- Rechargeable battery for use with 12v and 24v DC power supply units
- Can be used to power access control systems in the event of a power failure
- Low self-discharge rate means the batteries can be stored for up to one year at normal ambient temperatures, with no loss of capacity
Specification & Documentation
Option
7.0 AmpHour
Supply Voltage (VDC)
12
Type
Power Supply
Material
ABS
Pack Quantity
1
About this product
- Rechargeable battery for use with 12v and 24v DC power supply units
- Can be used to power access control systems in the event of a power failure
- Low self-discharge rate means the batteries can be stored for up to one year at normal ambient temperatures, with no loss of capacity
Specification & Documentation
Option
7.0 AmpHour
Supply Voltage (VDC)
12
Type
Power Supply
Material
ABS
Pack Quantity
1
About this product
- Press to Exit button for use with access control systems
- Stainless steel 22mm diameter button
- Wear resistant legend - suitable for high traffic areas
- Momentary switch - will operate while the button is pressed
- High impact plastic back box
- Can be surface or flush fitting
- Easy clean surface
- Screw footprint for flush fitting onto standard back box
- Contacts : Double pole NO/NC
- Size 115 x 44mm
- Output : 4 AMP contact @ 30 V ACDC
- For interior use only
Specification & Documentation
Depth (mm)
31
Length (mm)
115
Option
Narrow Style
Size (mm)
115 x 43 x 31
Type
Exit Switch/Button
Width (mm)
44m
Supply Voltage (VAC)/VDC
12/24
Material
304 Stainless Steel
Pack Quantity
1
Documents
About this product
- Press to Exit button for use with access control systems
- Stainless steel 22mm diameter button
- Wear resistant legend - suitable for high traffic areas
- Momentary switch - will operate while the button is pressed
- High impact plastic back box
- Can be surface or flush fitting
- Easy clean surface
- Screw footprint for flush fitting onto standard back box
- Contacts : Double pole NO/NC
- Size 115 x 44mm
- Output : 4 AMP contact @ 30 V ACDC
- For interior use only
Specification & Documentation
Depth (mm)
31
Length (mm)
115
Option
Narrow Style
Size (mm)
115 x 43 x 31
Type
Exit Switch/Button
Width (mm)
44m
Supply Voltage (VAC)/VDC
12/24
Material
304 Stainless Steel
Pack Quantity
1
Documents
This product is rated 5.0 out of 5 by other customers
simple and strong
simple power supply, well-designed, strong enclosure
Nice PSU, great price
It did the job perfectly. (Powered a 12v door strike)
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
About this product
- Boxed power supply unit that's ideal for use with access control or alarm systems
- High efficiency electronics for reduced running costs and use in lower temperature areas
- Installer safe design with all high voltage electronic fully shrouded
- Full electronic short circuit and overload protection on load output under mains operation
- Suitable for battery back-up (sold separately on our website)
- Mains transient protection
- Hinged lid for easy access and rear anti-vandal tamper detection
- Green mains present LED
- Red fault LED
Specification & Documentation
Depth (mm)
200
Length (mm)
225
Option
1 Amp 12VDC
Size (mm)
225 x 195 x 200
Supply Voltage (VDC)
12
Type
Power Supply
Width (mm)
195
Material
Cold Rolled Steel
Pack Quantity
1
Reviews
Sort by:
These reviews are verified by an independent third party for authenticity.
Ian Clark - 7 months ago
simple and strong
simple power supply, well-designed, strong enclosure
Was this review helpful?
Verified customer
Premier CCTV Services - 3 years ago
Nice PSU, great price
It did the job perfectly. (Powered a 12v door strike)
Was this review helpful?
Verified customer
Anonymous - 9 years ago
Great power supply with small foot print and battery back up I use these for door entry systems , dual com power supplies on fire alarms and also remote powered sounders if the current panel is not capable.
Was this review helpful?
Verified customer
Page 1 of 1
Questions
